Samsung Galaxy A03 Core A032MUBS7CZA3

Samsung Galaxy A03 Core A032MUBS7CZA3 Firmware

Samsung Galaxy A03 Core A032MUBS7CZA3 is an Android 13 firmware for Chile (CHL), Colombia (COM), Panama (CPA). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A032MUBS7CZA2 https://samfirm.shop/build/A032MUBS7CZA2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A032M is available: A032MUBS7CZA5 https://samfirm.shop/build/A032MUBS7CZA5.

8.9/10 (150)2,795 times
Android 13
OS Version
2026-01-29
First release
other regions until 2026-02-05
n/a
Security patch
3
Countries
3
CSC codes
7
Bootloader binary

Bootloader binary 7. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A032MUBS7CZA1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A032M
    CHL Chile
    COM Colombia
    CPA Panama
    A032MOWA7CZA3 2026-01-29 2.055 GiB
    SM-A032M_3_20260117034510_c6dq53tr6x_fac.zip

    No matching downloads

    How to flash A032MUBS7CZA3

    • A032MUBS7CZA3 has bootloader binary 7. Your device must run binary 7 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of A032MUBS7CZA3 by region

    First release
    January 29, 2026
    Last region
    February 5, 2026
    Duration
    8 days
    Regions
    3
    1. Day 1 · · 1 region
      PanamaCPA
    2. Day 6 · · 1 region
      ColombiaCOM
    3. Day 8 · · 1 region
      ChileCHL

    Device specifications

    • Launched withAndroid 11
    • Display diagonal16.5 cm (6.5")
    • Display resolution720 x 1600 pixels
    • RAM2 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • Battery capacity5000 mAh
    • Weight211 g

    Specifications of SM-A032F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    A032MUBS7CZA3 is Android 13 firmware for Samsung Galaxy A03 Core, released for Chile (CHL), Colombia (COM), Panama (CPA). Samsung built it on 2026-01-29.

    No. A newer build for SM-A032M is available: A032MUBS7CZA5. Install it instead of A032MUBS7CZA3 unless you need this exact version. The previous build was A032MUBS7CZA2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.055 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A03 Core must be on bootloader binary 7 or lower.

    This build uses bootloader binary 7. It can be flashed on a Samsung Galaxy A03 Core running binary 7 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A03 Core

    https://samfirm.shop/build/A032MUBS7CZA5

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.
    https://samfirm.shop/build/A032MUBS7CZA2

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    No changelog details available.
    https://samfirm.shop/build/A032MUBS6CYF4

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 10 older builds

    • Stability and reliability
    Device behavior has been improved.

    • The security of your device has been improved.

    No changelog details available.
    https://samfirm.shop/build/A032MUBS5CYA8

    • The security of your device has been improved.

    No changelog details available.

    • The security of your device has been improved.