Samsung Galaxy A03 A035FXXU2BVI2
SM-A035F 12 countries Android 12

Samsung Galaxy A03 A035FXXU2BVI2 Firmware

Samsung Galaxy A03 A035FXXU2BVI2 is an Android 12 firmware for 12 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A035FXXU2BVH6, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A035F is available: A035FXXS9CYG1.

8.9/10 (488)65,898 times
Android 12
OS Version
2022-09-15
First release
other regions until 2022-09-24
2022-07-01
Security patch
12
Countries
14
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A03 use bootloader binary 9 (latest: A035FXXS9CYG1). If your device already runs binary 9, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    4
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-A035F
    GLB, XTC Philippines
    MYM Myanmar (Burma)
    THL Thailand
    XME Malaysia
    +2 more countries
    XXV Vietnam
    AIS, CAL, TRM
    		A035FOLM2BVI2A035FXXU2BVI2 2022-09-16 2022-09-19 4.305 GiB
    SM-A035F_2_20220914182020_s6l4wjt7ey_fac.zip
    SM-A035F
    CAU, SKZ Kazakhstan
    SEK Ukraine
    SER Russia
    		A035FOXE2BVI2A035FXXU2BVI2 2022-09-22 2022-09-15 4.521 GiB
    SM-A035F_2_20220914085320_7kcul8riuh_fac.zip
    SM-A035F
    XID Indonesia
    		A035FOLE2BVI2A035FXXU2BVI5 2022-09-24 2022-09-26 4.292 GiB
    SM-A035F_2_20220922183510_qalb3m51vi_fac.zip
    SM-A035F
    XID Indonesia
    		A035FOLE2BVI2A035FXXU2BVI2 2022-09-16 2022-09-19 4.292 GiB
    SM-A035F_2_20220914182220_gmvghadd4g_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 11
    • Display diagonal16.5 cm (6.5")
    • Display resolution720 x 1600 pixels
    • RAM4 GB
    • Rear camera resolution48 MP
    • Rear camera typeDual camera
    • Battery capacity5000 mAh
    • Weight199 g

    Specifications of SM-A035G, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    What's new in A035FXXU2BVI2

    • Stability and reliability
    Device behavior has been improved.

    How to flash A035FXXU2BVI2

    • A035FXXU2BVI2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A035FXXU2BVI2 is Android 12 firmware for Samsung Galaxy A03, released for 12 countries, 14 CSC codes. It includes the 2022-07-01 security patch. Samsung built it on 2022-09-15.

    No. A newer build for SM-A035F is available: A035FXXS9CYG1. Install it instead of A035FXXU2BVI2 unless you need this exact version. The previous build was A035FXXU2BVH6.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A03 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A03 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A03

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    Show 15 older builds

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    One UI Core 5.1 Update

    One UI Core 5.1 takes your phone to the next level with new Gallery features as well as productivity and personalization enhancements.

    Gallery

    Revamped info display
    When you swipe up while viewing a picture or video in your Gallery, you can see when and where the picture was taken, which device took the picture, where the picture is stored, and more. Now with a simpler layout.

    Multitasking

    Easily minimize or switch to full screen
    You can now minimize or maximize a...

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.

    • Stability and reliability
    Device behavior has been improved.

    One UI Core 5 Upgrade (Android 13)

    One UI Core 5 brings you more powerful personalization and makes it easier to get things done across your Galaxy devices.

    Visual design

    New app icons and illustrations
    Icon symbols are larger for a bolder look that's easier to scan. Subtle background gradients and improved contrast give a fresher, more natural feel. New help illustrations have been created to give a consistent look to all apps.

    Smoother than ever before
    New animations and transition effec...

    • Stability and reliability
    Device behavior has been improved.

    • Stability and reliability
    Device behavior has been improved.

    • Security
    The device is protected with improved security.

    One UI Core 4.1 Upgrade (Android 12)

    One UI Core 4.1 brings you a wide array of new features and enhancements for your Galaxy devices. More intuitive, more fun, more secure, and easier than ever.

    Check out the changes below.

    Color palette

    Customize your phone with unique colors based on your wallpaper. Your colors will be applied to menus, buttons, backgrounds, and apps throughout your phone.

    Privacy

    One UI Core 4.1 offers strong privacy protection to make sure your personal information...

    One UI Core 4.1 Upgrade (Android 12)

    One UI Core 4.1 brings you a wide array of new features and enhancements for your Galaxy devices. More intuitive, more fun, more secure, and easier than ever.

    Check out the changes below.

    Color palette

    Customize your phone with unique colors based on your wallpaper. Your colors will be applied to menus, buttons, backgrounds, and apps throughout your phone.

    Privacy

    One UI Core 4.1 offers strong privacy protection to make sure your personal information...

    Model firmware by region