SM-A115AP 1 country Android 12

Samsung Galaxy A11 A115APUCS8CWB1 Firmware

Name: Samsung Galaxy A11 (SM-A115AP)
Brand: Samsung
Availability: InStock

Samsung Galaxy A11 A115APUCS8CWB1 is an Android 12 firmware for United States (ATT). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A115APUCU8CVI3 https://samfirm.shop/build/A115APUCU8CVI3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A115AP is available: A115APUCSACWL1 https://samfirm.shop/build/A115APUCSACWL1.

8.9/10 (32)217 times

Android 12

OS Version

2023-02-20

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 8. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A11 use bootloader binary A (10) (latest: A115APUCSACWL1). If your device already runs binary A (10), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: A115APUCS8CWB1

Model	Region	CSC Version	Release date	Size	File name	Download
SM-A115AP	ATT United States	A115APATT8CWB1	2023-03-23	3.081 GiB	SM-A115AP_3_20230220183511_0hlcyi8mqp_fac.zip

Device specifications

Launched withAndroid 10.0
Display diagonal16.3 cm (6.4")
Display resolution720 x 1560 pixels
Display typePLS
RAM2 GB
Rear camera resolution13 MP
Rear camera typeTriple camera
Battery capacity4000 mAh
Weight177 g

Specifications of SM-A115, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A115APUCS8CWB1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A115APUCS8CWB1 has bootloader binary 8. Your device must run binary 8 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A115APUCS8CWB1 is Android 12 firmware for Samsung Galaxy A11, released for United States (ATT). Samsung built it on 2023-02-20.

No. A newer build for SM-A115AP is available: A115APUCSACWL1. Install it instead of A115APUCS8CWB1 unless you need this exact version. The previous build was A115APUCU8CVI3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.081 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A11 must be on bootloader binary 8 or lower.

This build uses bootloader binary 8. It can be flashed on a Samsung Galaxy A11 running binary 8 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.