Samsung Galaxy A13 5G A136BXXSADXK1
SM-A136B 28 countries Android 14

Samsung Galaxy A13 5G A136BXXSADXK1 Firmware

Samsung Galaxy A13 5G A136BXXSADXK1 is an Android 14 firmware for 28 countries, 44 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A136BZHSADXK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A136B is available: A136BXXSDDZC1.

8.7/10 (371)98,084 times
Android 14
OS Version
2024-11-19
First release
other regions until 2024-12-02
2024-11-01
Security patch
28
Countries
44
CSC codes
A (10)
Bootloader binary

Bootloader binary A (10). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A13 5G use bootloader binary D (13) (latest: A136BXXSDDZC1). If your device already runs binary D (13), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-A136B
    BOG, SFR France
    EUX, EUY Europe
    EVR United Kingdom
    MEO Portugal
    +11 more countries
    MET, TSI Ireland
    MOB Austria
    MOT, SIM Slovenia
    MSR Serbia
    O2C Czechia
    PLS, PRT Poland
    SWC Switzerland
    TIM Italy
    TOP Montenegro
    VIP Croatia
    BTB, BTE
    		A136BOXMADXK1A136BXXSADXK1 2024-11-21 2024-11-19 5.228 GiB
    SM-A136B_3_20241104172441_xbvvyrxp05_fac.zip
    SM-A136B
    GLB, XTC Philippines
    MM1, SIN, STH, XSP Singapore
    OPP, OPS, TEL, TLP, VAP, VAU, XSA Australia
    THL Thailand
    +3 more countries
    XME Malaysia
    XNZ New Zealand
    CAL
    		A136BOLMADXK1A136BXXSADXK2 2024-12-02 2024-11-21 4.65 GiB
    SM-A136B_3_20241111212840_8rxpbhov06_fac.zip
    SM-A136B
    EGY Egypt
    KSA Saudi Arabia
    MID Iraq
    XFA, XFV South Africa
    +1 more country
    XSG United Arab Emirates
    		A136BOJMADXK1A136BXXSADXK1 2024-11-21 2024-11-21 4.581 GiB
    SM-A136B_3_20241106164311_5dfsrms2ge_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal16.5 cm (6.5")
    • Display resolution720 x 1600 pixels
    • Processor frequency2 GHz
    • Processor familyMediaTek Dimensity
    • Processor modelDimensity 700
    • RAM4 GB
    • Rear camera resolution50 MP
    • Rear camera typeTriple camera
    • SIM cardsDual SIM
    • Battery capacity5000 mAh
    • Weight195 g

    What's new in A136BXXSADXK1

    • Security
    The device is protected with improved security.

    How to flash A136BXXSADXK1

    • A136BXXSADXK1 has bootloader binary A (10). Your device must run binary A (10) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A136BXXSADXK1 is Android 14 firmware for Samsung Galaxy A13 5G, released for 28 countries, 44 CSC codes. It includes the 2024-11-01 security patch. Samsung built it on 2024-11-19.

    No. A newer build for SM-A136B is available: A136BXXSDDZC1. Install it instead of A136BXXSADXK1 unless you need this exact version. The previous build was A136BZHSADXK1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A13 5G must be on bootloader binary A (10) or lower.

    This build uses bootloader binary A (10). It can be flashed on a Samsung Galaxy A13 5G running binary A (10) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 5 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A13 5G

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 15 older builds

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    • Stability and reliability
    Device behavior has been improved.

    • Overall stability of your device has been improved.

    • Security
    The device is protected with improved security.

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    • Security
    The device is protected with improved security.

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    • Stability and reliability
    Device behavior has been improved.

    • The security of your device has been improved.

    • The latest Android security patch has been applied.
    - Device security has been further enhanced.

    One UI 6.1 Upgrade
    Customize your Galaxy

    New wallpaper editing features
    Decorate your wallpaper however you like. When you select an image to use as your wallpaper, you can now apply frames and effects.

    More widgets for your Lock screen
    Additional widgets are available for your Lock screen so you can quickly check useful information without unlocking your phone. The new widgets include Weather, Samsung Health, Battery, Reminder, Calendar, and Clock.

    Customize alarm alerts
    Use an image, vid...

    Model firmware by region