Samsung Galaxy A13 5G A136USQSEDYF2
SM-A136U 3 countries Android 13

Samsung Galaxy A13 5G A136USQSEDYF2 Firmware

Samsung Galaxy A13 5G A136USQSEDYF2 is an Android 13 firmware for APP, CHA, United States (AIO, ATT, CCT, USC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A136USQSDDYD1: bootloader binary raised from D (13) to E (14), so after installing it there is no way back to older builds; security patch 2025-07-01 instead of 2025-04-01. A newer build for SM-A136U is available: A136USQSFDYJ1.

9.3/10 (255)9,169 times
Android 13
OS Version
2025-07-23
First release
other regions until 2025-07-28
2025-07-01
Security patch
3
Countries
6
CSC codes
E (14)
Bootloader binary

Bootloader binary E (14). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A13 5G use bootloader binary F (15) (latest: A136USQSFDYJ1). If your device already runs binary F (15), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A136USQSEDYF2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A136U
    AIO United States
    		A136UOYNEDYF2 2025-07-28 2025-07-28 4.425 GiB
    SM-A136U_3_20250711203730_hji1g15qs1_fac.zip
    SM-A136U
    APP
    		A136UOYNEDYF2 2025-07-28 2025-07-28 4.425 GiB
    SM-A136U_3_20250711204640_t3bvo7yc30_fac.zip
    SM-A136U
    ATT United States
    		A136UOYNEDYF2 2025-07-28 2025-07-28 4.425 GiB
    SM-A136U_3_20250701124241_cnogeg8adl_fac.zip
    SM-A136U
    CCT United States
    		A136UOYNEDYF2 2025-07-25 2025-07-29 4.401 GiB
    SM-A136U_3_20250709172341_f6mx6316f3_fac.zip
    SM-A136U
    CHA
    		A136UOYNEDYF2 2025-07-25 2025-07-29 4.425 GiB
    SM-A136U_3_20250711201620_4tr356htk6_fac.zip
    SM-A136U
    USC United States
    		A136UOYNEDYF2 2025-07-23 2025-08-04 4.425 GiB
    SM-A136U_3_20250711202820_xjm1oflclm_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal16.5 cm (6.5")
    • Display resolution720 x 1600 pixels
    • RAM4 GB
    • Rear camera resolution50 MP
    • Rear camera typeTriple camera
    • Battery capacity5000 mAh
    • Weight195 g

    Specifications of SM-A136B, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    What's new in A136USQSEDYF2

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    How to flash A136USQSEDYF2

    • A136USQSEDYF2 has bootloader binary E (14). Your device must run binary E (14) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A136USQSEDYF2 is Android 13 firmware for Samsung Galaxy A13 5G, released for APP, CHA, United States (AIO, ATT, CCT, USC). It includes the 2025-07-01 security patch. Samsung built it on 2025-07-23.

    No. A newer build for SM-A136U is available: A136USQSFDYJ1. Install it instead of A136USQSEDYF2 unless you need this exact version. The previous build was A136USQSDDYD1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A13 5G must be on bootloader binary E (14) or lower.

    This build uses bootloader binary E (14). It can be flashed on a Samsung Galaxy A13 5G running binary E (14) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A13 5G

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • The security of your device has been improved.

    Show 15 older builds

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    No changelog details available.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Model firmware by region