Samsung Galaxy A22 A225MUBS7CXD1
SM-A225M 1 country Android 13

Samsung Galaxy A22 A225MUBS7CXD1 Firmware

Samsung Galaxy A22 A225MUBS7CXD1 is an Android 13 firmware for Brazil (ZTA, ZTM, ZTO, ZVV). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A225MUBU7CXA5, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A225M is available: A225MUBSCCYE4.

9.1/10 (474)11,549 times
Android 13
OS Version
2024-04-11
Build Date
2024-02-01
Security patch
1
Countries
4
CSC codes
7
Bootloader binary

Bootloader binary 7. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A22 use bootloader binary C (12) (latest: A225MUBSCCYE4). If your device already runs binary C (12), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A225MUBS7CXD1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A225M
    ZTA, ZTM, ZTO, ZVV Brazil
    		A225MOWO7CXD1 2024-04-11 5.392 GiB
    SM-A225M_3_20240404212430_odbmvq2q6n_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal16.3 cm (6.4")
    • Display resolution720 x 1600 pixels
    • Display typeSAMOLED
    • RAM4 GB
    • Rear camera resolution48 MP
    • Rear camera typeQuad camera
    • Battery capacity5000 mAh
    • Weight186 g

    Specifications of SM-A225F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    What's new in A225MUBS7CXD1

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    How to flash A225MUBS7CXD1

    • A225MUBS7CXD1 has bootloader binary 7. Your device must run binary 7 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A225MUBS7CXD1 is Android 13 firmware for Samsung Galaxy A22, released for Brazil (ZTA, ZTM, ZTO, ZVV). It includes the 2024-02-01 security patch. Samsung built it on 2024-04-11.

    No. A newer build for SM-A225M is available: A225MUBSCCYE4. Install it instead of A225MUBS7CXD1 unless you need this exact version. The previous build was A225MUBU7CXA5.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 5.392 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A22 must be on bootloader binary 7 or lower.

    This build uses bootloader binary 7. It can be flashed on a Samsung Galaxy A22 running binary 7 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A22

    • Security

    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security

    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security

    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security

    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • The security of your device has been improved.

    Show 15 older builds

    • The security of your device has been improved.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    Model firmware by region