Samsung Galaxy A30 A305GUBS2ASI2
SM-A305G 1 country Android 9 (Pie)

Samsung Galaxy A30 A305GUBS2ASI2 Firmware

Samsung Galaxy A30 A305GUBS2ASI2 is an Android 9 (Pie) firmware for Argentina (PSN). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A305GUBS2ASH4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A305G is available: A305GUBS8CWI1.

9.1/10 (469)4,426 times
Android 9 (Pie)
OS Version
2019-09-20
Build Date
2019-09-01
Security patch
1
Countries
1
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A30 use bootloader binary 8 (latest: A305GUBS8CWI1). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A305GDXS2ASH4
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A305G
    PSN Argentina
    		A305GOWB2ASI2 2019-10-01 3.375 GiB
    SM-A305G_1_20210305225705_33fauvxqnk_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal16.3 cm (6.4")
    • Display resolution1080 x 2340 pixels
    • Display typeSAMOLED
    • Processor frequency1.8 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeDual camera
    • SIM cardsDual SIM
    • Battery capacity4000 mAh
    • Weight165 g

    What's new in A305GUBS2ASI2

    · The security of your device has been improved.

    How to flash A305GUBS2ASI2

    • A305GUBS2ASI2 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A305GUBS2ASI2 is Android 9 (Pie) firmware for Samsung Galaxy A30, released for Argentina (PSN). It includes the 2019-09-01 security patch. Samsung built it on 2019-09-20.

    No. A newer build for SM-A305G is available: A305GUBS8CWI1. Install it instead of A305GUBS2ASI2 unless you need this exact version. The previous build was A305GUBS2ASH4.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.375 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A30 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A30 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 9 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A30

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    · Security patch update
    Show 15 older builds
    · Security patch update

    • Overall stability of your device has been improved.

    · Security patch update

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    One UI 3.1 Upgrade (Android 11)
    One UI 3.1 is designed to help you focus on what matters. Our visual redesign has improved the places you visit the most, like the Home screen and quick panel, to reduce distractions, highlight important information, and make your experience more consistent. Performance improvements will help apps run quicker while using less battery power. And One UI 3.1 puts control in your hands with new privacy controls, one-time permissions, and enhanced Digital Wellbeing....

    • The stability of Camera has been improved.
    • The security of your device has been improved.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    · Security patch update

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · The security of your device has been improved.

    Model firmware by region