SM-A505N 1 country Android 11

Samsung Galaxy A50 A505NKSS6DWB1 Firmware

Name: Samsung Galaxy A50 (SM-A505N)
Brand: Samsung
Availability: InStock

Samsung Galaxy A50 A505NKSS6DWB1 is an Android 11 firmware for South Korea (KOO, KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A505NKSU6DVK2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-A505N.

9.1/10 (474)16,555 times

Android 11

OS Version

2023-03-09

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: A505NKOU6DVK1

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-A505N	KOO South Korea	A505NOKR6DWB1	2023-03-09	2023-03-09	4.195 GiB	SM-A505N_2_20230214184430_v8u4d7lj46_fac.zip
SM-A505N	KTC South Korea	A505NOKR6DWB1	2023-03-09	2023-03-09	4.658 GiB	SM-A505N_2_20230214182001_tzc5lkujcy_fac.zip
SM-A505N	LUC South Korea	A505NOKR6DWB1	2023-03-09	2023-03-09	4.702 GiB	SM-A505N_2_20230214183210_w3m2cr21ov_fac.zip
SM-A505N	SKC South Korea	A505NOKR6DWB1	2023-03-09	2023-03-09	4.58 GiB	SM-A505N_2_20230214180101_jop1qxm6jp_fac.zip

Device specifications

Display diagonal16.3 cm (6.4")
Display resolution1080 x 2340 pixels
Display typeSAMOLED
RAM4 GB
Rear camera resolution25 MP
Rear camera typeTriple camera
Battery capacity4000 mAh
Weight166 g

Specifications of SM-A505F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A505NKSS6DWB1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A505NKSS6DWB1 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A505NKSS6DWB1 is Android 11 firmware for Samsung Galaxy A50, released for South Korea (KOO, KTC, LUC, SKC). Samsung built it on 2023-03-09.

Yes. A505NKSS6DWB1 is the newest build for SM-A505N on SamFirm. The previous build was A505NKSU6DVK2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A50 must be on bootloader binary 6 or lower.

This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy A50 running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 7 other builds of this model use the same binary, so you can switch between them in both directions.