SM-A510Y 3 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy A5 (2016) A510YDOS7CTI2 Firmware

Name: Samsung Galaxy A5 (2016) (SM-A510Y)
Brand: Samsung
Availability: InStock

Samsung Galaxy A5 (2016) A510YDOS7CTI2 is an Android 6.0.1 (Marshmallow) firmware for Fiji (VFJ), New Zealand (NZC, TNZ, VNZ), Papua New Guinea (PNG). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A510YDOS7CSG2 https://samfirm.shop/build/A510YDOS7CSG2: Android updated from Android 7.0 (Marshmallow) to Android 6.0.1 (Marshmallow). This is the newest build for SM-A510Y.

8.7/10 (452)21,994 times

Android 6.0.1 (Marshmallow)

OS Version

2020-10-31

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 7. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: A510YDXS7CSG2

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-A510Y	NZC New Zealand	A510YNZC7CSD2	2020-10-31	2020-10-31	1.795 GiB	SM-A510Y_1_20201031142634_nbsm9lfzqp_fac.zip
SM-A510Y	PNG Papua New Guinea	A510YPNG7CSD2	2020-10-31	2020-10-31	1.795 GiB	SM-A510Y_1_20201030190534_3i5fjxoh9d_fac.zip
SM-A510Y	TNZ New Zealand	A510YTNZ7CSD2	2020-10-31	2020-10-31	1.798 GiB	SM-A510Y_1_20201031142334_y39v68lmmj_fac.zip
SM-A510Y	VFJ Fiji	A510YVFJ7CSD2	2020-10-31	2020-10-31	1.776 GiB	SM-A510Y_1_20201031142934_fixx1d78zg_fac.zip MD5:1fb597e6c87a3d7c1475e3d3e9d9386c SHA1:c660947758b3dda954b85d9c903791b22f8b9746
SM-A510Y	VNZ New Zealand	A510YVNZ7CSD2	—	2020-10-31	1.797 GiB	SM-A510Y_1_20201031143534_fqe3hatdp1_fac.zip

Device specifications

Launched withAndroid 5.1
Display diagonal13.2 cm (5.2")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
RAM2 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
Battery capacity2900 mAh
Weight155 g

Specifications of SM-A510, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A510YDOS7CTI2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A510YDOS7CTI2 has bootloader binary 7. Your device must run binary 7 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A510YDOS7CTI2 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy A5 (2016), released for Fiji (VFJ), New Zealand (NZC, TNZ, VNZ), Papua New Guinea (PNG). Samsung built it on 2020-10-31.

Yes. A510YDOS7CTI2 is the newest build for SM-A510Y on SamFirm. The previous build was A510YDOS7CSG2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A5 (2016) must be on bootloader binary 7 or lower.

This build uses bootloader binary 7. It can be flashed on a Samsung Galaxy A5 (2016) running binary 7 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.