Samsung Galaxy A8(2018) A530FXXULCUJ2
SM-A530F 1 country Android 9 (Pie)

Samsung Galaxy A8(2018) A530FXXULCUJ2 Firmware

Samsung Galaxy A8(2018) A530FXXULCUJ2 is an Android 9 (Pie) firmware for New Zealand (NZC, TNZ, VNZ, XNZ). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A530FXXSLCUJ1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A530F is available: A530FXXUMCZC1.

9.3/10 (473)17,248 times
Android 9 (Pie)
OS Version
2021-10-25
Build Date
2021-08-01
Security patch
1
Countries
4
CSC codes
L (21)
Bootloader binary

Bootloader binary L (21). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A8(2018) use bootloader binary M (22) (latest: A530FXXUMCZC1). If your device already runs binary M (22), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A530FXXULCUH4
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-A530F
    NZC New Zealand
    		A530FNZCLCUJ2 2021-10-25 2021-10-26 3.001 GiB
    SM-A530F_1_20211006145953_phsaz99f4e_fac.zip
    SM-A530F
    TNZ New Zealand
    		A530FTNZLCUJ2 2021-10-25 2021-10-26 3.052 GiB
    SM-A530F_1_20211006142505_716py73w95_fac.zip
    SM-A530F
    VNZ New Zealand
    		A530FVNZLCUJ2 2021-10-25 2021-10-26 3.022 GiB
    SM-A530F_1_20211006143853_5y6iofa9bw_fac.zip
    SM-A530F
    XNZ New Zealand
    		A530FXNZLCUJ2 2021-10-25 2021-10-26 2.982 GiB
    SM-A530F_1_20211006142501_ojc0w4bwn5_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 7.1.1
    • Display diagonal14.2 cm (5.6")
    • Display resolution1080 x 2220 pixels
    • Display typeSAMOLED
    • Processor frequency2.2 GHz
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity3000 mAh
    • Weight172 g

    What's new in A530FXXULCUJ2

    • The security of your device has been improved.

    How to flash A530FXXULCUJ2

    • A530FXXULCUJ2 has bootloader binary L (21). Your device must run binary L (21) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A530FXXULCUJ2 is Android 9 (Pie) firmware for Samsung Galaxy A8(2018), released for New Zealand (NZC, TNZ, VNZ, XNZ). It includes the 2021-08-01 security patch. Samsung built it on 2021-10-25.

    No. A newer build for SM-A530F is available: A530FXXUMCZC1. Install it instead of A530FXXULCUJ2 unless you need this exact version. The previous build was A530FXXSLCUJ1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A8(2018) must be on bootloader binary L (21) or lower.

    This build uses bootloader binary L (21). It can be flashed on a Samsung Galaxy A8(2018) running binary L (21) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 21 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A8(2018)

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.
    • Security
    The device is protected with improved security.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • An emergency alert (Emergency Cell Broadcast) feature has been added in Ukraine.

    Show 15 older builds

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    · Security patch update
    · Security patch update
    · Security patch update
    · Security patch update

    · The security of your device has been improved.

    · Security patch update

    • The security of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    · Security patch update

    · The security of your device has been improved.

    • The security of your device has been improved.

    Model firmware by region