Samsung Galaxy A6 A600FNXXU6CTH2
SM-A600FN 1 country Android 10

Samsung Galaxy A6 A600FNXXU6CTH2 Firmware

Samsung Galaxy A6 A600FNXXU6CTH2 is an Android 10 firmware for Poland (PRT). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A600FNXXU6CTH1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A600FN is available: A600FNXXU9CVE1.

9.1/10 (475)8,417 times
Android 10
OS Version
2020-08-21
First release
other regions until 2020-08-27
2020-06-01
Security patch
1
Countries
1
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A6 use bootloader binary 9 (latest: A600FNXXU9CVE1). If your device already runs binary 9, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-A600FN
    PRT Poland
    		A600FNPRT6CTH1A600FNXXU6CTF1 2020-08-27 2020-09-14 3.25 GiB
    SM-A600FN_2_20220308004720_hllk1ns2kp_fac.zip
    SM-A600FN
    PRT Poland
    		A600FN6CTH1A600FNXXU6CTH2 2020-08-21 2020-09-14 — —

    No matching downloads

    Device specifications

    • Display diagonal14.2 cm (5.6")
    • Display resolution1480 x 720 pixels
    • Display typeSAMOLED
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3000 mAh
    • Weight162 g

    What's new in A600FNXXU6CTH2

    • Overall device performance has been improved.

    How to flash A600FNXXU6CTH2

    • A600FNXXU6CTH2 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    A600FNXXU6CTH2 is Android 10 firmware for Samsung Galaxy A6, released for Poland (PRT). It includes the 2020-06-01 security patch. Samsung built it on 2020-08-21.

    No. A newer build for SM-A600FN is available: A600FNXXU9CVE1. Install it instead of A600FNXXU6CTH2 unless you need this exact version. The previous build was A600FNXXU6CTH1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.25 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A6 must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy A6 running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A6

    • An emergency alert (Emergency Cell Broadcast) feature has been added in Ukraine.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Improved stability of the following applications or features: Google RCS
    • The security of your device has been improved.

    • Improved stability of the following applications or features: Google RCS
    • The security of your device has been improved.

    Show 15 older builds

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    • Overall stability of functions improved.
    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • Overall device performance has been improved.

    • Overall device performance has been improved.

    • Overall device performance has been improved.

    • Overall device performance has been improved.

    · The security of your device has been improved.

    One UI 2 upgrade with Android 10

    One UI 2 brings you Android 10, with exciting new features from Samsung and Google based on feedback from users like you.
    We recommend that you back up your important data to keep it safe during the upgrade.
    Some apps, including Calculator, Samsung Internet, Samsung Health and Samsung Notes, need to be updated individually after you update your OS.

    Here's what's new.

    Dark mode
    - Enhanced image, text, and color adjustments for day and night environments.
    - Dark...

    Model firmware by region