SM-A600N 1 country Android 8.0.0 (Pie)

Samsung Galaxy A6 A600NKSS5CTI3 Firmware

Name: Samsung Galaxy A6 (SM-A600N)
Brand: Samsung
Availability: InStock

Samsung Galaxy A6 A600NKSS5CTI3 is an Android 8.0.0 (Pie) firmware for South Korea (KOO, KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A600NKSU4CTG5: Android updated from Android 10 to Android 8.0.0 (Pie); bootloader binary raised from 4 to 5, so after installing it there is no way back to older builds. A newer build for SM-A600N is available: A600NKSS8CWA1.

9.3/10 (451)18,019 times

Android 8.0.0 (Pie)

OS Version

2020-10-19

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A6 use bootloader binary 8 (latest: A600NKSS8CWA1). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: A600NKOS5CTI3

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-A600N	KOO South Korea	A600NOKR5CTI3	2020-10-19	2020-10-19	3.025 GiB	SM-A600N_2_20200924152034_tq1pz3qkkk_fac.zip
SM-A600N	KTC South Korea	A600NOKR5CTI3	2020-10-19	2020-10-19	3.443 GiB	SM-A600N_2_20200924151104_ve02s3nns4_fac.zip
SM-A600N	LUC South Korea	A600NOKR5CTI3	2020-10-19	2020-10-19	3.499 GiB	SM-A600N_2_20200924153404_4eyyvr6yq7_fac.zip
SM-A600N	SKC South Korea	A600NOKR5CTI3	2020-10-19	2020-10-19	3.283 GiB	SM-A600N_2_20200924150934_fezuj72yn9_fac.zip

Device specifications

Launched withAndroid 8.0
Display diagonal14.2 cm (5.6")
Display resolution720 x 1480 pixels
Display typeSAMOLED
RAM3 GB
Rear camera resolution16 MP
Rear camera typeSingle camera
Battery capacity3000 mAh

Specifications of SM-A600F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A600NKSS5CTI3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A600NKSS5CTI3 has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A600NKSS5CTI3 is Android 8.0.0 (Pie) firmware for Samsung Galaxy A6, released for South Korea (KOO, KTC, LUC, SKC). Samsung built it on 2020-10-19.

No. A newer build for SM-A600N is available: A600NKSS8CWA1. Install it instead of A600NKSS5CTI3 unless you need this exact version. The previous build was A600NKSU4CTG5.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A6 must be on bootloader binary 5 or lower.

This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy A6 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 5.