Samsung Galaxy A6+ A605FNPUU6CTJ1
SM-A605FN 1 country Android 8.0.0 (Pie)

Samsung Galaxy A6+ A605FNPUU6CTJ1 Firmware

Samsung Galaxy A6+ A605FNPUU6CTJ1 is an Android 8.0.0 (Pie) firmware for Russia (SER). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A605FNXXU6CTJ1: Android updated from Android 9 (Oreo) to Android 8.0.0 (Pie). A newer build for SM-A605FN is available: A605FNXXU8CVF1.

9.1/10 (454)4,465 times
Android 8.0.0 (Pie)
OS Version
n/a
Build Date
n/a
Security patch
1
Countries
1
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A6+ use bootloader binary 8 (latest: A605FNXXU8CVF1). If your device already runs binary 8, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: A605FNXXU6CTG1
    ModelRegionCSC VersionSizeFile nameDownload
    SM-A605FN
    SER Russia
    		A605FNSER6CTJ1 — —

    No matching downloads

    How to flash A605FNPUU6CTJ1

    • A605FNPUU6CTJ1 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 8.0
    • Display diagonal15.2 cm (6")
    • Display resolution1080 x 2220 pixels
    • Display typeSAMOLED
    • Processor frequency1.8 GHz
    • Processor familyQualcomm Snapdragon
    • Processor model450
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeDual camera
    • SIM cardsDual SIM
    • Battery capacity3500 mAh
    • Weight191 g

    Frequently Asked Questions

    A605FNPUU6CTJ1 is Android 8.0.0 (Pie) firmware for Samsung Galaxy A6+, released for Russia (SER).

    No. A newer build for SM-A605FN is available: A605FNXXU8CVF1. Install it instead of A605FNPUU6CTJ1 unless you need this exact version. The previous build was A605FNXXU6CTJ1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A6+ must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy A6+ running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 4 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A6+

    • The security of your device has been improved.

    · The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    Show 5 older builds

    • The security of your device has been improved.

    · The security of your device has been improved.

    Model firmware by region