SM-A710M 1 country Android 6.0.1 (Nougat)

Samsung Galaxy A7(2016) A710MUBU2BPL1 Firmware

Name: Samsung Galaxy A7(2016) (SM-A710M)
Brand: Samsung
Availability: InStock

Samsung Galaxy A7(2016) A710MUBU2BPL1 is an Android 6.0.1 (Nougat) firmware for Brazil (ZTO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A710MUBU2BPJ1: Android updated from Android 6.0.1 (Marshmallow) to Android 6.0.1 (Nougat). A newer build for SM-A710M is available: A710MUBS2CTJ4.

8.7/10 (453)4,369 times

Android 6.0.1 (Nougat)

OS Version

2016-12-20

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: A710MUBU2BPL1

Model	Region	CSC Version	Size	File name	Download
SM-A710M	ZTO Brazil	A710M2BPL1	—	—

Device specifications

Launched withAndroid 5.1
Display diagonal14 cm (5.5")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
RAM3 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
Battery capacity3300 mAh
Weight172 g

Specifications of SM-A710F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A710MUBU2BPL1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A710MUBU2BPL1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A710MUBU2BPL1 is Android 6.0.1 (Nougat) firmware for Samsung Galaxy A7(2016), released for Brazil (ZTO). Samsung built it on 2016-12-20.

No. A newer build for SM-A710M is available: A710MUBS2CTJ4. Install it instead of A710MUBU2BPL1 unless you need this exact version. The previous build was A710MUBU2BPJ1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A7(2016) must be on bootloader binary 2 or lower.

This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A7(2016) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 20 other builds of this model use the same binary, so you can switch between them in both directions.

Other builds and changelog for Samsung Galaxy A7(2016)

A710MUBS2CTJ4 Nov 13, 2020

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

A710MUBS2CTJ3