SM-A720S 1 country Android 8.0.0 (Pie)

Samsung Galaxy A7(2017) A720SKSU3BRI4 Firmware

Name: Samsung Galaxy A7(2017) (SM-A720S)
Brand: Samsung
Availability: InStock

Samsung Galaxy A7(2017) A720SKSU3BRI4 is an Android 8.0.0 (Pie) firmware for South Korea (SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A720SKSU2BRF4 https://samfirm.shop/build/A720SKSU2BRF4: Android updated from Android 8.0.0 (Oreo) to Android 8.0.0 (Pie); bootloader binary raised from 2 to 3, so after installing it there is no way back to older builds. A newer build for SM-A720S is available: A720SKSU5CUJ2 https://samfirm.shop/build/A720SKSU5CUJ2.

9.2/10 (453)8,710 times

Android 8.0.0 (Pie)

OS Version

2018-09-20

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A7(2017) use bootloader binary 5 (latest: A720SKSU5CUJ2). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Release date	Size	File name	Download
SM-A720S	SKC South Korea	A720S3BRI4	A720SKSU3BRI4	—	—	—
SM-A720S	SKC South Korea	A720SSKC3BRI4	A720NKOU3BRI4	2018-10-16	3.104 GiB	SM-A720S_1_20211015171637_ji3edy0cvd_fac.zip

Device specifications

Launched withAndroid 6.0.16
Display diagonal14.5 cm (5.7")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
RAM3 GB
Rear camera resolution16 MP
Rear camera typeSingle camera
Battery capacity3600 mAh
Weight186 g

Specifications of SM-A720F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A720SKSU3BRI4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A720SKSU3BRI4 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A720SKSU3BRI4 is Android 8.0.0 (Pie) firmware for Samsung Galaxy A7(2017), released for South Korea (SKC). Samsung built it on 2018-09-20.

No. A newer build for SM-A720S is available: A720SKSU5CUJ2. Install it instead of A720SKSU3BRI4 unless you need this exact version. The previous build was A720SKSU2BRF4.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.104 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A7(2017) must be on bootloader binary 3 or lower.

This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy A7(2017) running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.