Samsung Galaxy A8+(2018) A730FXXS3BSA2
SM-A730F 3 countries Android 8.0.0 (Oreo)

Samsung Galaxy A8+(2018) A730FXXS3BSA2 Firmware

Samsung Galaxy A8+(2018) A730FXXS3BSA2 is an Android 8.0.0 (Oreo) firmware for Brazil (ZTA), Dominican Republic (CDR), Ecuador (ECO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A730FXXU3BSA2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A730F is available: A730FXXU7CZC1.

9.0/10 (456)12,954 times
Android 8.0.0 (Oreo)
OS Version
2019-01-14
Build Date
2019-01-01
Security patch
3
Countries
3
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A8+(2018) use bootloader binary 7 (latest: A730FXXU7CZC1). If your device already runs binary 7, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    MODEM/CP Version: A730FXXS3BSA2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-A730F
    CDR Dominican Republic
    		A730FOWA3BRI1 2019-01-31 3.087 GiB
    SM-A730F_1_20220115003820_msuwy3z26m_fac.zip
    SM-A730F
    ECO Ecuador
    		A730FOWA3BRI1 2019-01-31 3.087 GiB
    SM-A730F_1_20220115003710_s4jpjc2y2r_fac.zip
    SM-A730F
    ZTA Brazil
    		A730FOWA3BRI1 2019-01-31 3.087 GiB
    SM-A730F_1_20220115002301_e8h4clgc04_fac.zip

    No matching downloads

    How to flash A730FXXS3BSA2

    • A730FXXS3BSA2 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in A730FXXS3BSA2

    · The security of your device has been improved.

    Rollout of A730FXXS3BSA2 by region

    Samsung released this build in all regions (3) on the same day, January 31, 2019.

    Device specifications

    • Launched withAndroid 7.1.1
    • Display diagonal15.2 cm (6")
    • Display resolution2220 x 1080 pixels
    • Display typeSAMOLED
    • Processor frequency2.2 GHz
    • Processor familySamsung Exynos
    • Processor model7885
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3500 mAh
    • Weight191 g

    Frequently Asked Questions

    A730FXXS3BSA2 is Android 8.0.0 (Oreo) firmware for Samsung Galaxy A8+(2018), released for Brazil (ZTA), Dominican Republic (CDR), Ecuador (ECO). It includes the 2019-01-01 security patch. Samsung built it on 2019-01-14.

    No. A newer build for SM-A730F is available: A730FXXU7CZC1. Install it instead of A730FXXS3BSA2 unless you need this exact version. The previous build was A730FXXU3BSA2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A8+(2018) must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy A8+(2018) running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 17 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy A8+(2018)

    • Stability and reliability
    Device behavior has been improved.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Overall stability of your device has been improved.

    • An emergency alert (Emergency Cell Broadcast) feature has been added in Ukraine.

    · The security of your device has been improved.

    • The security of your device has been improved.

    Show 14 older builds

    · The security of your device has been improved.

    • Added new feature. - Google RCS(Rich Communication Service)
    • The security of your device has been improved.

    • LGPD (General Personal Data Protection Law) has been applied.
    • The security of your device has been improved.

    · The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · The security of your device has been improved.

    • The security of your device has been improved.

    • The stability of Game Tools has been improved.
    • The security of your device has been improved.

    No changelog details available.
    Model firmware by region