SM-A750N 1 country Android 9 (Pie)

Samsung Galaxy A7 (2018) A750NKSU2BSG3 Firmware

Name: Samsung Galaxy A7 (2018) (SM-A750N)
Brand: Samsung
Availability: InStock

Samsung Galaxy A7 (2018) A750NKSU2BSG3 is an Android 9 (Pie) firmware for South Korea (KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A750NKSU1BSE3: bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-A750N is available: A750NKSU3CVH1.

9.3/10 (469)12,909 times

Android 9 (Pie)

OS Version

2019-07-11

First release

other regions until 2019-07-12

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A7 (2018) use bootloader binary 3 (latest: A750NKSU3CVH1). If your device already runs binary 3, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-A750N	KTC South Korea	A750NOKR2BSG3	A750NKSU2BSG3	2019-07-11	—	—	—
SM-A750N	LUC South Korea	A750NOKR2BSG3	A750NKSU2BSG3	2019-07-11	—	—	—
SM-A750N	SKC South Korea	A750NOKR2BSG3	A750NKOU2BSG1	2019-07-12	2019-07-30	3.536 GiB	SM-A750N_1_20200121120502_vyblokny79_fac.zip

Device specifications

Launched withAndroid 8.0
Display diagonal15.2 cm (6")
Display resolution2220 x 1080 pixels
Display typeSAMOLED
RAM4 GB
Rear camera resolution24 MP
Rear camera typeTriple camera
Battery capacity3300 mAh
Weight168 g

Specifications of SM-A750, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A750NKSU2BSG3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A750NKSU2BSG3 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A750NKSU2BSG3 is Android 9 (Pie) firmware for Samsung Galaxy A7 (2018), released for South Korea (KTC, LUC, SKC). Samsung built it on 2019-07-11.

No. A newer build for SM-A750N is available: A750NKSU3CVH1. Install it instead of A750NKSU2BSG3 unless you need this exact version. The previous build was A750NKSU1BSE3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 3.536 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy A7 (2018) must be on bootloader binary 2 or lower.

This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy A7 (2018) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.