SM-A920N 1 country Android 9

Samsung Galaxy A9 (2018) A920NKSU1BSD1 Firmware

Name: Samsung Galaxy A9 (2018) (SM-A920N)
Brand: Samsung
Availability: InStock

Samsung Galaxy A9 (2018) A920NKSU1BSD1 is an Android 9 firmware for South Korea (KOO). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build A920NKSU1BSC8, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-A920N is available: A920NKSU5CVG1.

9.4/10 (452)4,398 times

Android 9

OS Version

2019-04-04

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy A9 (2018) use bootloader binary 5 (latest: A920NKSU5CVG1). If your device already runs binary 5, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: A920NKSU1BSD1

Model	Region	CSC Version	Size	File name	Download
SM-A920N	KOO South Korea	A920N1BSD1	—	—

Device specifications

Launched withAndroid 8.0
Display diagonal16 cm (6.3")
Display resolution2220 x 1080 pixels
Display typeSAMOLED
RAM6 GB
Rear camera resolution24 MP
Rear camera typeQuad camera
Battery capacity3720 mAh
Weight183 g

Specifications of SM-A920, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash A920NKSU1BSD1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

A920NKSU1BSD1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

A920NKSU1BSD1 is Android 9 firmware for Samsung Galaxy A9 (2018), released for South Korea (KOO). Samsung built it on 2019-04-04.

No. A newer build for SM-A920N is available: A920NKSU5CVG1. Install it instead of A920NKSU1BSD1 unless you need this exact version. The previous build was A920NKSU1BSC8.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy A9 (2018) must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy A9 (2018) running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 2 other builds of this model use the same binary, so you can switch between them in both directions.