SM-E500F 1 country Android 5.1.1 (Lollipop)

Samsung Galaxy E5 E500FXWS1BPL3 Firmware

Name: Samsung Galaxy E5 (SM-E500F)
Brand: Samsung
Availability: InStock

Samsung Galaxy E5 E500FXWS1BPL3 is an Android 5.1.1 (Lollipop) firmware for Mongolia (MBC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build E500FXXS1BPL2 https://samfirm.shop/build/E500FXXS1BPL2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-E500F is available: E500FXXS1BRH3 https://samfirm.shop/build/E500FXXS1BRH3.

9.2/10 (471)8,564 times

Android 5.1.1 (Lollipop)

OS Version

2016-12-12

First release

other regions until 2017-03-22

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-E500F	MBC Mongolia	E500FMBC1BOK1	E500FXWU1BOI1	2017-03-22	2017-03-22	1.156 GiB	SM-E500F_1_20170322100039_zvov15c880_fac.zip
SM-E500F	MBC Mongolia	E500F1BOK1	E500FXWS1BPL3	2016-12-12	—	—	—

Device specifications

Display diagonal12.7 cm (5")
Display resolution1280 x 720 pixels
Display typeSAMOLED
RAM1.5 GB
Rear camera resolution8 MP
Rear camera typeSingle camera
Battery capacity2400 mAh
Weight120 g

Specifications of SM-E500, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash E500FXWS1BPL3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

E500FXWS1BPL3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

E500FXWS1BPL3 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy E5, released for Mongolia (MBC). Samsung built it on 2016-12-12.

No. A newer build for SM-E500F is available: E500FXXS1BRH3. Install it instead of E500FXWS1BPL3 unless you need this exact version. The previous build was E500FXXS1BPL2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.156 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy E5 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy E5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 30 other builds of this model use the same binary, so you can switch between them in both directions.