SM-F907N 1 country Android 11

Samsung Galaxy Fold 5G F907NKOU3EUBF Firmware

Name: Samsung Galaxy Fold 5G (SM-F907N)
Brand: Samsung
Availability: InStock

Samsung Galaxy Fold 5G F907NKOU3EUBF is an Android 11 firmware for South Korea (KOO, KTC, LUC, SKC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build F907NKOU3CTJ4: Android updated from Android 10 to Android 11. A newer build for SM-F907N is available: F907NKOU3IXJ1.

8.7/10 (461)17,877 times

Android 11

OS Version

2021-03-02

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: F907NKOU3EUBB

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-F907N	KOO South Korea	F907NOKR3EUBF	2021-03-02	2021-03-02	5.695 GiB	SM-F907N_2_20210220114205_vswutry93d_fac.zip
SM-F907N	KTC South Korea	F907NOKR3EUBF	2021-03-02	2021-03-02	5.695 GiB	SM-F907N_2_20210220111805_skh9icl69v_fac.zip
SM-F907N	LUC South Korea	F907NOKR3EUBF	2021-03-02	2021-03-02	5.695 GiB	SM-F907N_2_20210220111935_ugiice7iem_fac.zip
SM-F907N	SKC South Korea	F907NOKR3EUBF	2021-03-02	2021-03-02	5.695 GiB	SM-F907N_2_20210220111334_c8xm1r6zd4_fac.zip

Device specifications

Display diagonal18.5 cm (7.3")
Display resolution2152 x 1536 pixels
Display typeDynamic AMOLED
RAM12 GB
Rear camera resolution12 MP
Rear camera typeTriple camera
Battery capacity4235 mAh
Weight276 g

Specifications of SM-F907, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash F907NKOU3EUBF

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

F907NKOU3EUBF has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

F907NKOU3EUBF is Android 11 firmware for Samsung Galaxy Fold 5G, released for South Korea (KOO, KTC, LUC, SKC). Samsung built it on 2021-03-02.

No. A newer build for SM-F907N is available: F907NKOU3IXJ1. Install it instead of F907NKOU3EUBF unless you need this exact version. The previous build was F907NKOU3CTJ4.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 5.695 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Fold 5G must be on bootloader binary 3 or lower.

This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy Fold 5G running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 24 other builds of this model use the same binary, so you can switch between them in both directions.