SM-G130E 18 countries Android 4.4.2 (KitKat)

Samsung Galaxy Young2 G130EXXU0ANL1 Firmware

Name: Samsung Galaxy Young2 (SM-G130E)
Brand: Samsung
Availability: InStock

Samsung Galaxy Young2 G130EXXU0ANL1 is an Android 4.4.2 (KitKat) firmware for 18 countries, 20 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G130EXXU0ANJ1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G130E is available: G130EXXS0AQD2.

9.0/10 (453)87,104 times

Android 4.4.2 (KitKat)

OS Version

2014-12-24

First release

other regions until 2015-04-21

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-G130E	AFG Afghanistan BTC, LYS Libya DKR Kenya EGY Egypt +6 more countries KSA Saudi Arabia MID Iraq PAK Pakistan TUN Tunisia XFE South Africa XSG United Arab Emirates	G130EOJV0AOA1, G130EOJV0ANL1	G130EXXU0ANL1	2014-12-29	—	541.776 MiB	SM-G130E_1_20150909073340_dbks5ihpli_fac.zip
SM-G130E	CAC Uzbekistan SEK Ukraine SKZ Kazakhstan	G130EOXE0ANL1	G130EXAU0ANL1	2014-12-29	2015-01-13	506.911 MiB	SM-G130E_1_20151019155153_vyyscllr1w_fac.zip
SM-G130E	INS, INU India SLK Sri Lanka	G130EODD0ANL1	G130EXXU0ANL1	2014-12-24	—	507.826 MiB	SM-G130E_1_20150616142826_ufnhks2wgr_fac.zip
SM-G130E	MWD Morocco	G130EOJV0ANL1	G130EXXU0ANL1	2014-12-24	—	541.773 MiB	SM-G130E_1_20150909073514_w3uhojcj8j_fac.zip
SM-G130E	NPL Nepal	G130EODD0ANL1	G130EXXU0ANL1	2014-12-24	—	507.826 MiB	SM-G130E_1_20150822083539_a3zgf9x2af_fac.zip
SM-G130E	THR Iran	G130EOJV0ANL1	G130EXXU0ANL1	2015-04-21	2015-04-21	537.964 MiB	SM-G130E_1_20150909073700_8w1ycemq1n_fac.zip

Device specifications

Launched withAndroid 4.4
Display diagonal8.89 cm (3.5")
Display resolution320 x 480 pixels
Display typeTFT
Processor frequency1 GHz
Processor modelA7
RAM0.5 GB
Rear camera resolution2 MP
Rear camera typeSingle camera
SIM cardsDual SIM
Battery capacity1300 mAh
Weight108 g

How to flash G130EXXU0ANL1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G130EXXU0ANL1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G130EXXU0ANL1 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy Young2, released for 18 countries, 20 CSC codes. Samsung built it on 2014-12-24.

No. A newer build for SM-G130E is available: G130EXXS0AQD2. Install it instead of G130EXXU0ANL1 unless you need this exact version. The previous build was G130EXXU0ANJ1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Young2 must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Young2 running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.