SM-G318H 1 country Android 4.4.4 (KitKat)

Samsung Galaxy Ace4 Lite G318HJVS0API1 Firmware

Name: Samsung Galaxy Ace4 Lite (SM-G318H)
Brand: Samsung
Availability: InStock

Samsung Galaxy Ace4 Lite G318HJVS0API1 is an Android 4.4.4 (KitKat) firmware for South Africa (XFA, XFV). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G318HXCU0API1 https://samfirm.shop/build/G318HXCU0API1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G318H is available: G318HXCU0AQK2 https://samfirm.shop/build/G318HXCU0AQK2.

9.2/10 (452)12,831 times

Android 4.4.4 (KitKat)

OS Version

2016-09-14

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Release date	Size	File name
SM-G318H	XFA South Africa	G318HOJV0APF2	G318HJVS0API1	—	—	—
SM-G318H	XFV South Africa	G318H0APF2	G318HJVS0API1	—	—	—
SM-G318H	XFV South Africa	G318HXFV0APF2	G318HXCU0APE2	2016-10-05	568.078 MiB	SM-G318H_1_20170502211226_wr718epq90_fac.zip

Device specifications

Display diagonal10.2 cm (4")
Display resolution480 x 800 pixels
Display typeTFT
Processor frequency1.2 GHz
RAM0.5 GB
Rear camera resolution3 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity1500 mAh
Weight123 g

How to flash G318HJVS0API1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G318HJVS0API1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G318HJVS0API1 is Android 4.4.4 (KitKat) firmware for Samsung Galaxy Ace4 Lite, released for South Africa (XFA, XFV). Samsung built it on 2016-09-14.

No. A newer build for SM-G318H is available: G318HXCU0AQK2. Install it instead of G318HJVS0API1 unless you need this exact version. The previous build was G318HXCU0API1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 568.078 MiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy Ace4 Lite must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy Ace4 Lite running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 75 other builds of this model use the same binary, so you can switch between them in both directions.