SM-G389F 7 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy Xcover3 G389FXXU1AVGL Firmware

Name: Samsung Galaxy Xcover3 (SM-G389F)
Brand: Samsung
Availability: InStock

Samsung Galaxy Xcover3 G389FXXU1AVGL is an Android 6.0.1 (Marshmallow) firmware for 7 countries, 11 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G389FXXU1AVGK, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-G389F.

9.3/10 (485)49,382 times

Android 6.0.1 (Marshmallow)

OS Version

2022-08-05

Build Date

2018-06-01

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: G389FXXU1ARC1

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-G389F	COS Greece	G389FCOS1AVGE	2022-08-05	2022-08-05	1.251 GiB	SM-G389F_1_20220805103400_nu05va9370_fac.zip
SM-G389F	DDE, DTM Germany DCO	G389FDDX1AVGE	2022-08-05	2022-08-05	1.323 GiB	SM-G389F_1_20220805103430_h29gkxoy5c_fac.zip
SM-G389F	DPL, TPL Poland	G389FDPX1AVGE	2022-08-05	2022-08-05	1.309 GiB	SM-G389F_1_20220805103520_w89mgmnqh4_fac.zip
SM-G389F	MAX, TRG, TTR Austria	G389FDAX1AVGE	2022-08-05	2022-08-05	1.27 GiB	SM-G389F_1_20220805103620_91431rp1oa_fac.zip
SM-G389F	TMS Slovakia	G389FTMS1AVGE	2022-08-05	2022-08-05	1.196 GiB	SM-G389F_1_20220805103640_618wmhaarh_fac.zip
SM-G389F	TMZ Czechia	G389FTMZ1AVGE	2022-08-05	2022-08-05	1.25 GiB	SM-G389F_1_20220805103701_ox4z8h7h5q_fac.zip

Device specifications

Display diagonal11.4 cm (4.5")
Display resolution480 x 800 pixels
Display typeTFT
Processor frequency1.3 GHz
RAM1.5 GB
Rear camera resolution5 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity2200 mAh
Weight154 g

What's new in G389FXXU1AVGL

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

How to flash G389FXXU1AVGL

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G389FXXU1AVGL has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G389FXXU1AVGL is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy Xcover3, released for 7 countries, 11 CSC codes. It includes the 2018-06-01 security patch. Samsung built it on 2022-08-05.

Yes. G389FXXU1AVGL is the newest build for SM-G389F on SamFirm. The previous build was G389FXXU1AVGK.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Xcover3 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Xcover3 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 45 other builds of this model use the same binary, so you can switch between them in both directions.

Other builds and changelog for Samsung Galaxy Xcover3

G389FXXU1AVGL this buildAug 4, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G389FXXU1AVGK Aug 2, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G389FXXU1AVGJ Aug 2, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G389FXXU1AVGI Aug 4, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G389FXXU1AVGH Aug 2, 2022

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

Show 15 older builds

G389FXXU1ARK1 Nov 7, 2018