Samsung Galaxy Grand Prime G530FXXU1API1
SM-G530F 6 countries Android 5.0.2 (Lollipop)

Samsung Galaxy Grand Prime G530FXXU1API1 Firmware

Samsung Galaxy Grand Prime G530FXXU1API1 is an Android 5.0.2 (Lollipop) firmware for 6 countries, 6 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G530FXXS1API1: Android updated from Android 5.0.2 (KitKat) to Android 5.0.2 (Lollipop). A newer build for SM-G530F is available: G530FXXS1ARK2.

9.1/10 (451)34,625 times
Android 5.0.2 (Lollipop)
OS Version
2016-09-09
First release
other regions until 2021-02-03
n/a
Security patch
6
Countries
6
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-G530F
    ILO Israel
    G530FILO1API1G530FXXU1ATI2 2021-02-03 2021-02-03 735.861 MiB
    SM-G530F_1_20210203213904_jjddjbm720_fac.zip
    SM-G530F
    ILO Israel
    G530FILO1API1G530FXXU1AOJ1 2016-10-24 2016-10-24 735.865 MiB
    SM-G530F_1_20161024102415_g4jc4zdodb_fac.zip
    SM-G530F
    ILO Israel
    G530F1API1G530FXXU1API1 2016-09-09 2021-02-04 — —
    SM-G530F
    KSA Saudi Arabia
    G530FOJV1API1G530FXXU1API1 2016-09-09 — — —
    SM-G530F
    TRC
    G530FQTRC1API1G530FXXU1AOJ1 2016-10-25 2016-10-24 830.443 MiB
    SM-G530F_1_20161025152502_pzy178ob62_fac.zip
    SM-G530F
    TRC
    G530FQ1API1G530FXXU1API1 2016-09-09 — — —
    SM-G530F
    TUN Tunisia
    G530FOJV1API1G530FXXU1API1 2016-09-09 — — —
    SM-G530F
    TUR Turkey
    G530FQ1API1G530FXXU1API1 2016-09-09 — — —
    SM-G530F
    XSG United Arab Emirates
    G530FOJV1API1G530FXXU1AOJ1 2016-09-09 2016-10-24 744.415 MiB
    SM-G530F_1_20210203212404_zcvn9xe7jw_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution540 x 960 pixels
    • Display typeTFT
    • Processor frequency1.2 GHz
    • RAM1 GB
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2600 mAh
    • Weight156 g

    What's new in G530FXXU1API1

    • The security of your device has been improved.

    How to flash G530FXXU1API1

    • G530FXXU1API1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G530FXXU1API1 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy Grand Prime, released for 6 countries, 6 CSC codes. Samsung built it on 2016-09-09.

    No. A newer build for SM-G530F is available: G530FXXS1ARK2. Install it instead of G530FXXU1API1 unless you need this exact version. The previous build was G530FXXS1API1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Grand Prime must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Grand Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 24 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy Grand Prime

    · The security of your device has been improved.

    • The security of your device has been improved.

    No changelog details available.
    No changelog details available.
    No changelog details available.
    Show 15 older builds

    • Network connectivity enhancement.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.