SM-G530H 2 countries Android 5.0.2 (Lollipop)

Samsung Galaxy Grand Prime G530HXCU1BPI2 Firmware

Name: Samsung Galaxy Grand Prime (SM-G530H)
Brand: Samsung
Availability: InStock

Samsung Galaxy Grand Prime G530HXCU1BPI2 is an Android 5.0.2 (Lollipop) firmware for Panama (TPA), Trinidad & Tobago (TTT). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G530HXCU1BPH3 https://samfirm.shop/build/G530HXCU1BPH3, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G530H is available: G530HXXS2BSB1 https://samfirm.shop/build/G530HXXS2BSB1.

9.1/10 (452)8,846 times

Android 5.0.2 (Lollipop)

OS Version

2016-09-19

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy Grand Prime use bootloader binary 2 (latest: G530HXXS2BSB1). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: G530HXCU1BPI2

Model	Region	CSC Version	Size	File name	Download
SM-G530H	TPA Panama	G530HUUB1BPI1	—	—
SM-G530H	TTT Trinidad & Tobago	G530HUUB1BPI1	—	—

Device specifications

Display diagonal12.7 cm (5")
Display resolution540 x 960 pixels
Display typeTFT
Processor frequency1.2 GHz
RAM1 GB
Rear camera resolution8 MP
Rear camera typeSingle camera
SIM cardsDual SIM
Battery capacity2600 mAh
Weight156 g

How to flash G530HXCU1BPI2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G530HXCU1BPI2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G530HXCU1BPI2 is Android 5.0.2 (Lollipop) firmware for Samsung Galaxy Grand Prime, released for Panama (TPA), Trinidad & Tobago (TTT). Samsung built it on 2016-09-19.

No. A newer build for SM-G530H is available: G530HXXS2BSB1. Install it instead of G530HXCU1BPI2 unless you need this exact version. The previous build was G530HXCU1BPH3.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy Grand Prime must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy Grand Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 48 other builds of this model use the same binary, so you can switch between them in both directions.

Other builds and changelog for Samsung Galaxy Grand Prime

G530HXXS2BSB1 Apr 16, 2019

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

G530HXXS2BSA2 Jan 17, 2019