Samsung Galaxy J5 Prime G570MUBS3BRI3
SM-G570M 11 countries Android 7.0 (Nougat)

Samsung Galaxy J5 Prime G570MUBS3BRI3 Firmware

Samsung Galaxy J5 Prime G570MUBS3BRI3 is an Android 7.0 (Nougat) firmware for 11 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G570MUBU3BRI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G570M is available: G570MUBS9CTJ3.

9.3/10 (473)86,789 times
Android 7.0 (Nougat)
OS Version
2018-09-19
First release
other regions until 2018-11-13
n/a
Security patch
11
Countries
14
CSC codes
3
Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J5 Prime use bootloader binary 9 (latest: G570MUBS9CTJ3). If your device already runs binary 9, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    20
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-G570M
    ANC Argentina
    		G570MUWE3BRG2G570MUBS3BRI3 2018-09-19 — — —
    SM-G570M
    BVT Bolivia
    		G570MUWM3BRG2G570MUBS3BRI1 2018-10-17 2018-11-15 2.417 GiB
    SM-G570M_1_20201113074203_hca6a8ob1w_fac.zip
    SM-G570M
    CDR Dominican Republic
    		G570M3BRG1G570MUBS3BRI3 2018-09-19 — — —
    SM-G570M
    CDR Dominican Republic
    		G570MCDR3BRG1G570MUBS3BRI1 2018-09-19 2018-10-29 2.475 GiB
    SM-G570M_1_20200718030034_lmge01jhqi_fac.zip
    SM-G570M
    CGU Guatemala
    		G570MUWM3BRG1G570MUBS3BRI1 2018-11-13 2018-11-16 2.418 GiB
    SM-G570M_1_20200618063933_w397cu29mq_fac.zip
    SM-G570M
    CHE Chile
    		G570MCHE2BRB1G570MUBS3BRI2 2018-11-08 2018-11-13 2.146 GiB
    SM-G570M_1_20200930054733_bda06idprc_fac.zip
    SM-G570M
    CHE Chile
    		G570M2BRB1G570MUBS3BRI3 2018-09-19 — — —
    SM-G570M
    COB Colombia
    		G570MUWT3BRG3G570MUBS3BRI1 2018-10-17 2018-11-08 2.255 GiB
    SM-G570M_1_20200724062603_2dav7nxlck_fac.zip
    SM-G570M
    COL Colombia
    		G570MUWM3BRG2G570MUBS3BRI1 2018-09-19 2018-10-29 2.42 GiB
    SM-G570M_1_20200723001303_p72pivzj55_fac.zip
    SM-G570M
    COM Colombia
    		G570MCOM3BRG1G570MUBS3BRI1 2018-10-21 2018-11-09 2.454 GiB
    SM-G570M_1_20200717204733_sod5xsnv68_fac.zip
    SM-G570M
    CRM Costa Rica
    		G570MUWT3BRG2G570MUBS3BRI3 2018-09-19 — — —
    SM-G570M
    ECO Ecuador
    		G570MECO3BRG1G570MUBS3BRI1 2018-09-28 2018-11-13 2.461 GiB
    SM-G570M_1_20200718033334_rpcget1std_fac.zip
    SM-G570M
    ECO Ecuador
    		G570M3BRG1G570MUBS3BRI3 2018-09-19 — — —
    SM-G570M
    JDI Jamaica
    		G570MJDI3BRG1G570MUBS3BRI1 2018-10-23 2018-11-09 2.077 GiB
    SM-G570M_1_20200814072633_iw498wxwm2_fac.zip
    SM-G570M
    JDI Jamaica
    		G570M3BRG1G570MUBS3BRI3 2018-09-19 — — —
    SM-G570M
    PET Peru
    		G570M3BRG1G570MUBS3BRI3 2018-09-19 — — —
    SM-G570M
    PET Peru
    		G570MPET3BRG1G570MUBS3BRI1 2018-09-19 2018-10-29 2.437 GiB
    SM-G570M_1_20200804030433_2699c8xrzy_fac.zip
    SM-G570M
    TGU Guatemala
    		G570MUWT3BRG2G570MUBS3BRI1 2018-10-17 2018-11-07 2.255 GiB
    SM-G570M_1_20200724073433_528ma5u4uj_fac.zip
    SM-G570M
    ZTA Brazil
    		G570MZTA3BRG1G570MUBS3BRI1 2018-10-21 2018-11-09 2.429 GiB
    SM-G570M_1_20200718033634_cskjxae21p_fac.zip
    SM-G570M
    ZTA Brazil
    		G570M3BRG1G570MUBS3BRI3 2018-09-19 — — —

    No matching downloads

    How to flash G570MUBS3BRI3

    • G570MUBS3BRI3 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of G570MUBS3BRI3 by region

    First release
    October 29, 2018
    Last region
    November 16, 2018
    Duration
    19 days
    Regions
    12
    1. Day 1 · · 3 regions
      ColombiaCOLDominican RepublicCDRPeruPET
    2. Day 10 · · 1 region
      GuatemalaTGU
    3. Day 11 · · 1 region
      ColombiaCOB
    4. Day 12 · · 3 regions
      BrazilZTAColombiaCOMJamaicaJDI
    5. Day 16 · · 2 regions
      ChileCHEEcuadorECO
    6. Day 18 · · 1 region
      BoliviaBVT
    7. Day 19 · · 1 region
      GuatemalaCGU

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeTFT
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • Battery capacity2400 mAh
    • Weight143 g

    Specifications of SM-G570F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    G570MUBS3BRI3 is Android 7.0 (Nougat) firmware for Samsung Galaxy J5 Prime, released for 11 countries, 14 CSC codes. Samsung built it on 2018-09-19.

    No. A newer build for SM-G570M is available: G570MUBS9CTJ3. Install it instead of G570MUBS3BRI3 unless you need this exact version. The previous build was G570MUBU3BRI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J5 Prime must be on bootloader binary 3 or lower.

    This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy J5 Prime running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 13 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J5 Prime

    No changelog details available.
    Model firmware by region