Samsung Galaxy J7 Prime G610FDDS1CSI1
SM-G610F 13 countries Android 8.1.0 (Oreo)

Samsung Galaxy J7 Prime G610FDDS1CSI1 Firmware

Samsung Galaxy J7 Prime G610FDDS1CSI1 is an Android 8.1.0 (Oreo) firmware for 13 countries, 15 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G610FXWS1CSI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G610F is available: G610FDDU1CTG2.

8.7/10 (472)65,654 times
Android 8.1.0 (Oreo)
OS Version
2019-09-05
First release
other regions until 2019-09-27
2019-09-01
Security patch
13
Countries
15
CSC codes
1
Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    MODEM/CP Version: G610FDDS1CSI1
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-G610F
    AFG Afghanistan
    AFR Kenya
    BTC, LYS Libya
    ECT Nigeria
    +8 more countries
    EGY Egypt
    PAK Pakistan
    THR Iran
    TMC Algeria
    TUN Tunisia
    WTL Saudi Arabia
    XFA South Africa
    TKD
    		G610FOJV1CSD1 2019-09-27 2019-11-18 2.391 GiB
    SM-G610F_10_20200526124529_dkzg6lxm5e_fac.zip
    MD5:ea3af255214b5d23080cbfb10ab36818
    SHA1:8e6fe34d248ab13fb92b8ca3c3bea64cdebde05a
    SM-G610F
    KSA Saudi Arabia
    		G610FOJV1CSB2 — — — —
    SM-G610F
    TUR Turkey
    		G610FOJV1CSB2 2019-09-05 2019-11-18 2.391 GiB
    SM-G610F_10_20200611164734_9buwgzjyoc_fac.zip

    No matching downloads

    How to flash G610FDDS1CSI1

    • G610FDDS1CSI1 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in G610FDDS1CSI1

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    Rollout of G610FDDS1CSI1 by region

    First release
    November 18, 2019
    Last region
    November 23, 2019
    Duration
    6 days
    Regions
    14
    1. Day 1 · · 11 regions
      AfghanistanAFGAlgeriaTMCEgyptEGYIranTHRLibyaBTCLYSPakistanPAKSaudi ArabiaWTLSouth AfricaXFATunisiaTUNTurkeyTUR
    2. Day 6 · · 3 regions
      KenyaAFRNigeriaECTTKD

    Device specifications

    • Display diagonal14 cm (5.5")
    • Display resolution1920 x 1080 pixels
    • Display typeTFT
    • Processor frequency1.6 GHz
    • RAM3 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity3300 mAh
    • Weight167 g

    Frequently Asked Questions

    G610FDDS1CSI1 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy J7 Prime, released for 13 countries, 15 CSC codes. It includes the 2019-09-01 security patch. Samsung built it on 2019-09-05.

    No. A newer build for SM-G610F is available: G610FDDU1CTG2. Install it instead of G610FDDS1CSI1 unless you need this exact version. The previous build was G610FXWS1CSI1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J7 Prime must be on bootloader binary 1 or lower.

    This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy J7 Prime running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 116 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J7 Prime

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · The security of your device has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Show 11 older builds

    · The security of your device has been improved.

    No changelog details available.

    · The security of your device has been improved.

    ※ If your device is encrypted, it must be decrypted before upgrading.

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region