SM-G610L 1 country Android 6.0.1 (Marshmallow)

Samsung Galaxy On7(2016) G610LKLU2CSB1 Firmware

Name: Samsung Galaxy On7(2016) (SM-G610L)
Brand: Samsung
Availability: InStock

Samsung Galaxy On7(2016) G610LKLU2CSB1 is an Android 6.0.1 (Marshmallow) firmware for South Korea (LUC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G610LKLU1CRK8 https://samfirm.shop/build/G610LKLU1CRK8: Android updated from Android 8.1.0 (Marshmallow) to Android 6.0.1 (Marshmallow); bootloader binary raised from 1 to 2, so after installing it there is no way back to older builds. A newer build for SM-G610L is available: G610LKLU2CTI1 https://samfirm.shop/build/G610LKLU2CTI1.

9.4/10 (452)8,767 times

Android 6.0.1 (Marshmallow)

OS Version

2019-02-21

First release

other regions until 2019-03-20

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: G610LKLU2CSB1

Model	Region	CSC Version	Build Date	Release date	Size	File name	Download
SM-G610L	LUC South Korea	G610LLUC2CSB1	2019-03-20	2019-03-20	2.253 GiB	SM-G610L_1_20190222133653_gcmnaama80_fac.zip
SM-G610L	LUC South Korea	G610L2CSB1	2019-02-21	—	—	—

Device specifications

Display diagonal14 cm (5.5")
Display resolution1920 x 1080 pixels
Display typeTFT
RAM3 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
Battery capacity3300 mAh
Weight167 g

Specifications of SM-G610, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash G610LKLU2CSB1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G610LKLU2CSB1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G610LKLU2CSB1 is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy On7(2016), released for South Korea (LUC). Samsung built it on 2019-02-21.

No. A newer build for SM-G610L is available: G610LKLU2CTI1. Install it instead of G610LKLU2CSB1 unless you need this exact version. The previous build was G610LKLU1CRK8.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.253 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy On7(2016) must be on bootloader binary 2 or lower.

This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy On7(2016) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 1 other build of this model uses the same binary, so you can switch between them in both directions.