Samsung Galaxy XCover7 Pro G766BXXSACZI3
SM-G766B 20 countries Android 16

Samsung Galaxy XCover7 Pro G766BXXSACZI3 Firmware

Samsung Galaxy XCover7 Pro G766BXXSACZI3 is an Android 16 firmware for 20 countries, 23 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G766BXXS9CZH1: bootloader binary raised from 9 to A (10), so after installing it there is no way back to older builds; security patch 2026-09-05 instead of 2026-08-05. This is the newest build for SM-G766B.

OS updates guaranteed until: Android 22Security updates until: May 23, 2032
9.0/10 (35)5,313 times
Android 16
OS Version
2026-09-10
Build Date
2026-09-05
Security patch
20
Countries
23
CSC codes
A (10)
Bootloader binary

Bootloader binary A (10). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    3
    MODEM/CP Version: G766BXXSACZI3
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G766B
    CAC Uzbekistan
    CAU, SKZ Kazakhstan
    EUX, EUY Europe
    TUR Turkey
    +1 more country
    SOZ
    		G766BOXMACZI3 2026-09-24 9.611 GiB
    SM-G766B_3_20260910094021_sjh1ztab5t_fac.zip
    SM-G766B
    EGY Egypt
    FWD, MWD Morocco
    ILO Israel
    KSA Saudi Arabia
    +4 more countries
    MID Iraq
    TUN Tunisia
    XSG United Arab Emirates
    ILP
    		G766BOJMACZI3 2026-09-24 9.268 GiB
    SM-G766B_3_20260910100700_d8t6gn5yt5_fac.zip
    SM-G766B
    THL Thailand
    XID Indonesia
    XME Malaysia
    XNZ New Zealand
    +3 more countries
    XSA Australia
    XSP Singapore
    XXV Vietnam
    		G766BOLMACZI3 2026-09-24 9.376 GiB
    SM-G766B_3_20260910095203_40a2v855p1_fac.zip

    No matching downloads

    Device specifications

    • Display diagonal16.8 cm (6.6")
    • Display resolution2408 x 1080 pixels
    • Processor frequency1.8 GHz
    • Processor familySnapdragon
    • Processor model7s Gen 3
    • RAM6 GB
    • Rear camera resolution50 MP
    • Rear camera typeDual camera
    • SIM cardsHybrid dual SIM
    • Battery capacity4350 mAh
    • Weight240 g

    What's new in G766BXXSACZI3

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    How to flash G766BXXSACZI3

    • G766BXXSACZI3 has bootloader binary A (10). Your device must run binary A (10) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G766BXXSACZI3 is Android 16 firmware for Samsung Galaxy XCover7 Pro, released for 20 countries, 23 CSC codes. It includes the 2026-09-05 security patch. Samsung built it on 2026-09-10.

    Yes. G766BXXSACZI3 is the newest build for SM-G766B on SamFirm. The previous build was G766BXXS9CZH1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy XCover7 Pro must be on bootloader binary A (10) or lower.

    This build uses bootloader binary A (10). It can be flashed on a Samsung Galaxy XCover7 Pro running binary A (10) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary A (10).

    Other builds and changelog for Samsung Galaxy XCover7 Pro

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    One UI 8.5
    Visual design

    Fresh new look
    One UI seamlessly integrates into your daily routine by combining immersive visuals with meaningful personalization for a more refined and sophisticated design. Transparent blur effects add depth and make content easier to navigate, while floating elements react organically to your workflow for a more focused experience. Through familiar and intuitive data visualization, One UI delivers a design that feels both personal and relatable, helping you focus...

    Show 9 older builds

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Model firmware by region