Samsung Galaxy S20 FE G780FXXSFFXC2
SM-G780F 4 countries Android 13

Samsung Galaxy S20 FE G780FXXSFFXC2 Firmware

Samsung Galaxy S20 FE G780FXXSFFXC2 is an Android 13 firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G780FXXSFFXC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G780F is available: G780FXXSOFYJ2.

OS updates guaranteed until: Android 13Security updates until: Oct 23, 2024
9.3/10 (489)11,513 times
Android 13
OS Version
2024-03-27
Build Date
2024-03-01
Security patch
4
Countries
4
CSC codes
F (15)
Bootloader binary

Bootloader binary F (15). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S20 FE use bootloader binary O (24) (latest: G780FXXSOFYJ2). If your device already runs binary O (24), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: G780FXXSFFXC2
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G780F
    BKD Bangladesh
    INS India
    NPL Nepal
    SLK Sri Lanka
    		G780FODMFFXA7 2024-03-28 6.126 GiB
    SM-G780F_4_20240311175700_n8f15zeurl_fac.zip

    No matching downloads

    Device specifications

    • Launched withAndroid 10.0
    • Display diagonal16.5 cm (6.5")
    • Display resolution1080 x 2400 pixels
    • Display typeSAMOLED
    • Processor frequency2.73 GHz
    • Processor familySamsung Exynos
    • Processor model990
    • RAM6 GB
    • RAM typeLPDDR5
    • Rear camera resolution12 MP
    • Rear camera typeTriple camera
    • Battery capacity4500 mAh
    • Weight190 g

    What's new in G780FXXSFFXC2

    • Security
    The device is protected with improved security.

    How to flash G780FXXSFFXC2

    • G780FXXSFFXC2 has bootloader binary F (15). Your device must run binary F (15) or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G780FXXSFFXC2 is Android 13 firmware for Samsung Galaxy S20 FE, released for 4 countries, 4 CSC codes. It includes the 2024-03-01 security patch. Samsung built it on 2024-03-27.

    No. A newer build for SM-G780F is available: G780FXXSOFYJ2. Install it instead of G780FXXSFFXC2 unless you need this exact version. The previous build was G780FXXSFFXC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 6.126 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S20 FE must be on bootloader binary F (15) or lower.

    This build uses bootloader binary F (15). It can be flashed on a Samsung Galaxy S20 FE running binary F (15) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S20 FE

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    Show 15 older builds

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    • Security
    The device is protected with improved security.

    These changes may vary depending on the model, country, or network operator of the customer environment.

    · The security of your device has been improved.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • Security
    The device is protected with improved security.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • Security
    The device is protected with improved security.

    • Security
    The device is protected with improved security.

    Model firmware by region