SM-G800Y 1 country Android 4.4.2 (KitKat)

Samsung Galaxy S5 mini G800YDVU1AOC2 Firmware

Name: Samsung Galaxy S5 mini (SM-G800Y)
Brand: Samsung
Availability: InStock

Samsung Galaxy S5 mini G800YDVU1AOC2 is an Android 4.4.2 (KitKat) firmware for Australia (TEL, TLP). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G800YUIU1AOC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G800Y is available: G800YDVU1CVG5.

8.7/10 (451)12,898 times

Android 4.4.2 (KitKat)

OS Version

2015-03-31

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Release date	Size	File name
SM-G800Y	TEL Australia	G800Y1AOB2	G800YDVU1AOC2	—	—	—
SM-G800Y	TEL Australia	G800YTEL1AOB2	G800YDVU1AOC3	2015-04-17	1.683 GiB	SM-G800Y_1_20220804172341_h4d9akosml_fac.zip
SM-G800Y	TLP Australia	G800Y1AOB1	G800YDVU1AOC2	—	—	—

Device specifications

Launched withAndroid 4.4
Display diagonal11.4 cm (4.5")
Display resolution720 x 1280 pixels
Display typeSAMOLED
RAM1.5 GB
Rear camera resolution8 MP
Rear camera typeSingle camera
Battery capacity2100 mAh
Weight120 g

Specifications of SM-G800F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash G800YDVU1AOC2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G800YDVU1AOC2 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G800YDVU1AOC2 is Android 4.4.2 (KitKat) firmware for Samsung Galaxy S5 mini, released for Australia (TEL, TLP). Samsung built it on 2015-03-31.

No. A newer build for SM-G800Y is available: G800YDVU1CVG5. Install it instead of G800YDVU1AOC2 unless you need this exact version. The previous build was G800YUIU1AOC1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.683 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S5 mini must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy S5 mini running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 20 other builds of this model use the same binary, so you can switch between them in both directions.

Other builds and changelog for Samsung Galaxy S5 mini

G800YDVU1CVG5 Aug 5, 2022

• GPS
The stability has been improved.

G800YDVU1CVG4 Aug 4, 2022

• GPS
The stability has been improved.

G800YDVU1CQC1 Mar 14, 2017