SM-G900F 2 countries Android 5.0 (Marshmallow)

Samsung Galaxy S5 G900FXXS1PPC4 Firmware

Name: Samsung Galaxy S5 (SM-G900F)
Brand: Samsung
Availability: InStock

Samsung Galaxy S5 G900FXXS1PPC4 is an Android 5.0 (Marshmallow) firmware for Germany (VD2), Spain (ATL). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G900FXXS1PPC2: Android updated from Android 5.0 (Lollipop) to Android 5.0 (Marshmallow). A newer build for SM-G900F is available: G900FXXS1PPCG.

9.3/10 (452)13,015 times

Android 5.0 (Marshmallow)

OS Version

2016-03-04

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Release date	Size	File name
SM-G900F	ATL Spain	G900F1POJ1	G900FXXS1PPC4	—	—	—
SM-G900F	VD2 Germany	G900F1POJ1	G900FXXS1PPC4	—	—	—
SM-G900F	VD2 Germany	G900FVD21POJ1	G900FXXU1POI2	2016-03-23	1.996 GiB	SM-G900F_1_20170516114652_uiij9hfdzz_fac.zip

Device specifications

Display diagonal12.9 cm (5.1")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
Processor frequency2.5 GHz
RAM2 GB
Rear camera resolution16 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity2800 mAh
Weight145 g

How to flash G900FXXS1PPC4

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G900FXXS1PPC4 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G900FXXS1PPC4 is Android 5.0 (Marshmallow) firmware for Samsung Galaxy S5, released for Germany (VD2), Spain (ATL). Samsung built it on 2016-03-04.

No. A newer build for SM-G900F is available: G900FXXS1PPCG. Install it instead of G900FXXS1PPC4 unless you need this exact version. The previous build was G900FXXS1PPC2.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.996 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S5 must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy S5 running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 289 other builds of this model use the same binary, so you can switch between them in both directions.