SM-G900T3 1 country Android 6.0.1 (Lollipop)

Samsung Galaxy S5 G900T3UVS3GPK3 Firmware

Name: Samsung Galaxy S5 (SM-G900T3)
Brand: Samsung
Availability: InStock

Samsung Galaxy S5 G900T3UVS3GPK3 is an Android 6.0.1 (Lollipop) firmware for United States (TMB). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G900T3UVS3GPI1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G900T3 is available: G900T3UVU3GRJ1.

9.2/10 (27)4,375 times

Android 6.0.1 (Lollipop)

OS Version

2016-11-17

First release

other regions until 2016-12-15

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: G900T3UVS3GPK3

Model	Region	CSC Version	Build Date	Release date	Size	File name	Download
SM-G900T3	TMB United States	G900T3TMB3GPK3	2016-12-15	2016-12-15	1.937 GiB	SM-G900T3_1_20161215142139_htmv2w6wmw_fac.zip
SM-G900T3	TMB United States	G900T33GPK3	2016-11-17	—	—	—

Device specifications

Launched withAndroid 4.4.2
Display diagonal12.9 cm (5.1")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
RAM2 GB
Rear camera resolution16 MP
Rear camera typeSingle camera
Battery capacity2800 mAh
Weight145 g

Specifications of SM-G900, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

How to flash G900T3UVS3GPK3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G900T3UVS3GPK3 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G900T3UVS3GPK3 is Android 6.0.1 (Lollipop) firmware for Samsung Galaxy S5, released for United States (TMB). Samsung built it on 2016-11-17.

No. A newer build for SM-G900T3 is available: G900T3UVU3GRJ1. Install it instead of G900T3UVS3GPK3 unless you need this exact version. The previous build was G900T3UVS3GPI1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.937 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S5 must be on bootloader binary 3 or lower.

This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy S5 running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 3 other builds of this model use the same binary, so you can switch between them in both directions.