SM-G903F 7 countries Android 6.0.1 (Lollipop)

Samsung Galaxy S5 Neo G903FXXU1BPD3 Firmware

Name: Samsung Galaxy S5 Neo (SM-G903F)
Brand: Samsung
Availability: InStock

Samsung Galaxy S5 Neo G903FXXU1BPD3 is an Android 6.0.1 (Lollipop) firmware for 7 countries, 14 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G903FXXU1API1: Android updated from Android 5.1.1 (Marshmallow) to Android 6.0.1 (Lollipop). A newer build for SM-G903F is available: G903FXXU2BVG3.

9.4/10 (452)60,457 times

Android 6.0.1 (Lollipop)

OS Version

2016-04-19

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S5 Neo use bootloader binary 2 (latest: G903FXXU2BVG3). If your device already runs binary 2, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: G903FXXU1BPD3

Model	Region	CSC Version	Release date	Size	File name
SM-G903F	COA Romania	G903F1BPD3	—	—	—
SM-G903F	COS Greece	G903F1BPD3	—	—	—
SM-G903F	CRO, DHR Croatia	G903FDHX1BPD3	2016-06-08	1.683 GiB	SM-G903F_1_20181031172027_3qj7zurieh_fac.zip
SM-G903F	DDE, DTM Germany	G903FDDX1BPD3	2016-06-08	1.737 GiB	SM-G903F_1_20181012093701_6n5jf8hv9p_fac.zip
SM-G903F	DNL, TNL Netherlands	G903FDNX1BPD3	2016-06-08	1.703 GiB	SM-G903F_1_20181031171327_nhqkjg476m_fac.zip
SM-G903F	DPL, TPL Poland	G903FDPX1BPE1	2016-06-08	1.721 GiB	SM-G903F_1_20181012095240_a1ajfk8ab7_fac.zip
SM-G903F	MAX, TRG, TTR Austria	G903FDAX1BPD3	2016-06-08	1.712 GiB	SM-G903F_1_20181015174214_kbqw9gbq5m_fac.zip
SM-G903F	XEO Poland	G903FOXA1BPD3	2016-05-19	1.653 GiB	SM-G903F_1_20220726162750_z8k2rttawm_fac.zip

Device specifications

Display diagonal12.9 cm (5.1")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
Processor frequency1.6 GHz
RAM2 GB
RAM typeLPDDR3
Rear camera resolution16 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity2800 mAh
Weight145 g

How to flash G903FXXU1BPD3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G903FXXU1BPD3 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G903FXXU1BPD3 is Android 6.0.1 (Lollipop) firmware for Samsung Galaxy S5 Neo, released for 7 countries, 14 CSC codes. Samsung built it on 2016-04-19.

No. A newer build for SM-G903F is available: G903FXXU2BVG3. Install it instead of G903FXXU1BPD3 unless you need this exact version. The previous build was G903FXXU1API1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S5 Neo must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy S5 Neo running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 52 other builds of this model use the same binary, so you can switch between them in both directions.

Other builds and changelog for Samsung Galaxy S5 Neo

G903FXXU2BVG3 Jul 26, 2022

• GPS
The stability has been improved.

G903FXXU2BRH2 Mar 28, 2019

· The security of your device has been improved.
· The stability of Samsung Cloud has been improved.
· GDPR has been added.(General Data Protection Regulation)

G903FXXU1BQL1 Dec 1, 2017