SM-G903W 1 country Android 5.1.1 (Lollipop)

Samsung Galaxy S5 Neo G903WVLU1APD8 Firmware

Name: Samsung Galaxy S5 Neo (SM-G903W)
Brand: Samsung
Availability: InStock

Samsung Galaxy S5 Neo G903WVLU1APD8 is an Android 5.1.1 (Lollipop) firmware for Canada (ESK). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G903WVLU1APD7 https://samfirm.shop/build/G903WVLU1APD7, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G903W is available: G903WVLU1CQI1 https://samfirm.shop/build/G903WVLU1CQI1.

9.1/10 (472)4,453 times

Android 5.1.1 (Lollipop)

OS Version

2016-04-26

Build Date

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 1. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

MODEM/CP Version: G903WVLU1APD8

Model	Region	CSC Version	Release date	Size	File name	Download
SM-G903W	ESK Canada	G903WOYA1APD8	2016-05-19	1.582 GiB	SM-G903W_1_20170929150139_7h4o61xteq_fac.zip MD5:d9384f526748463b596ecb23bb860b15 SHA1:662b24deeba61a61bf8c81e33b9812d628930a5f

Device specifications

Display diagonal12.9 cm (5.1")
Display resolution1920 x 1080 pixels
Display typeSAMOLED
Processor frequency1.6 GHz
RAM2 GB
RAM typeLPDDR3
Rear camera resolution16 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity2800 mAh
Weight145 g

How to flash G903WVLU1APD8

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G903WVLU1APD8 has bootloader binary 1. Your device must run binary 1 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G903WVLU1APD8 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy S5 Neo, released for Canada (ESK). Samsung built it on 2016-04-26.

No. A newer build for SM-G903W is available: G903WVLU1CQI1. Install it instead of G903WVLU1APD8 unless you need this exact version. The previous build was G903WVLU1APD7.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.582 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S5 Neo must be on bootloader binary 1 or lower.

This build uses bootloader binary 1. It can be flashed on a Samsung Galaxy S5 Neo running binary 1 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 8 other builds of this model use the same binary, so you can switch between them in both directions.