Samsung Galaxy S6 G920FXXS6ETJB
SM-G920F 17 countries Android 6.0.1 (Marshmallow)

Samsung Galaxy S6 G920FXXS6ETJB Firmware

Samsung Galaxy S6 G920FXXS6ETJB is an Android 6.0.1 (Marshmallow) firmware for 17 countries, 20 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G920FXXS6ETJ9: Android updated from Android 7.0 (Nougat) to Android 6.0.1 (Marshmallow). A newer build for SM-G920F is available: G920FXXU6EVI1.

8.9/10 (452)87,326 times
Android 6.0.1 (Marshmallow)
OS Version
n/a
Build Date
n/a
Security patch
17
Countries
20
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    20
    ModelRegionCSC VersionMODEM/CP VersionSizeFile nameDownload
    SM-G920F
    BGL Bulgaria
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    CAC Uzbekistan
    		G920FOXE6ETJBG920FXXU6ERCF — —
    SM-G920F
    CAU Kazakhstan
    		G920FOXE6ETJBG920FXXU6ERCF — —
    SM-G920F
    CYO Cyprus
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    ETL Czechia
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    MSR Serbia
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    ORX Slovakia
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    ROM Romania
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    SEB Baltic Europe
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    SEE Serbia
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    SEK Ukraine
    		G920FOXE6ETJBG920FXXU6ERCF — —
    SM-G920F
    SER Russia
    		G920FOXE6ETJBG920FXXU6ERCF — —
    SM-G920F
    SIO Slovenia
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    SKZ Kazakhstan
    		G920FOXE6ETJBG920FXXU6ERCF — —
    SM-G920F
    TEB Bosnia & Herzegovina
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    TOP Montenegro
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    TPH Portugal
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    TSR Serbia
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    TWO Croatia
    		G920FOXX6ETJBG920FXXU6ERC2 — —
    SM-G920F
    XEH Hungary
    		G920FOXX6ETJBG920FXXU6ERC2 — —

    No matching downloads

    How to flash G920FXXS6ETJB

    • G920FXXS6ETJB has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Device specifications

    • Launched withAndroid 5.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2550 mAh
    • Weight138 g

    Frequently Asked Questions

    G920FXXS6ETJB is Android 6.0.1 (Marshmallow) firmware for Samsung Galaxy S6, released for 17 countries, 20 CSC codes.

    No. A newer build for SM-G920F is available: G920FXXU6EVI1. Install it instead of G920FXXS6ETJB unless you need this exact version. The previous build was G920FXXS6ETJ9.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy S6 running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 50 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6

    No changelog details available.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 12 older builds

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    Model firmware by region