Samsung Galaxy S6 G920FXXU5EQCS
SM-G920F 21 countries Android 7.0 (Nougat)

Samsung Galaxy S6 G920FXXU5EQCS Firmware

Samsung Galaxy S6 G920FXXU5EQCS is an Android 7.0 (Nougat) firmware for 21 countries, 27 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G920FXXU5EQCN, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G920F is available: G920FXXU6EVI1.

9.1/10 (453)117,380 times
Android 7.0 (Nougat)
OS Version
2017-03-30
Build Date
n/a
Security patch
21
Countries
27
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 use bootloader binary 6 (latest: G920FXXU6EVI1). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    27
    MODEM/CP Version: G920FXXU5EQCS
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-G920F
    BGL Bulgaria
    		G920FOXX5EQD5 — — —
    SM-G920F
    CAC Uzbekistan
    		G920FOXE5EQC5 — — —
    SM-G920F
    CAU Kazakhstan
    		G920FOXE5EQC5 — — —
    SM-G920F
    CYO Cyprus
    		G920FOXX5EQD5 — — —
    SM-G920F
    GBL Bulgaria
    		G920F5EQD6 — — —
    SM-G920F
    MEO Portugal
    		G920F5EQD6 — — —
    SM-G920F
    MOT Slovenia
    		G920F5EQD6 — — —
    SM-G920F
    MSR Serbia
    		G920FOXX5EQD6 — — —
    SM-G920F
    O2C Czechia
    		G920F5EQB1 — — —
    SM-G920F
    OPT Portugal
    		G920F5EQD6 — — —
    SM-G920F
    PAN Hungary
    		G920F5EQD6 — — —
    SM-G920F
    PLS Poland
    		G920F5EQE1 — — —
    SM-G920F
    SEB Baltic Europe
    		G920FOXX5EQD5 — — —
    SM-G920F
    SEK Ukraine
    		G920FOXE5EQC5 — — —
    SM-G920F
    SER Russia
    		G920FOXE5EQC5 — — —
    SM-G920F
    SIO Slovenia
    		G920FOXX5EQD5 — — —
    SM-G920F
    SKZ Kazakhstan
    		G920FOXE5EQC5 — — —
    SM-G920F
    TEB Bosnia & Herzegovina
    		G920FOXX5EQD5 — — —
    SM-G920F
    TOP Montenegro
    		G920FOXX5EQD5 — — —
    SM-G920F
    TSI Ireland
    		G920F5EQD6 — — —
    SM-G920F
    TSR Serbia
    		G920FOXX5EQD5 — — —
    SM-G920F
    TWO Croatia
    		G920FOXX5EQD5 — — —
    SM-G920F
    VDS Sweden
    		G920F5EQD6 — — —
    SM-G920F
    VIM Macedonia
    		G920F5EQD6 — — —
    SM-G920F
    VVT Bulgaria
    		G920F5EQD6 — — —
    SM-G920F
    WIN Italy
    		G920F5EQD6 — — —
    SM-G920F
    XEF France
    		G920FOXA5EQCS 2017-04-25 2.41 GiB
    SM-G920F_1_20221005133311_lp9rrl4q3m_fac.zip
    MD5:a2421f8014eeb87992f1ef7f6032fe4b
    SHA1:19fa686b5b7166f0d8ba7823ecb8906879a28143

    No matching downloads

    Device specifications

    • Launched withAndroid 5.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2550 mAh
    • Weight138 g

    How to flash G920FXXU5EQCS

    • G920FXXU5EQCS has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G920FXXU5EQCS is Android 7.0 (Nougat) firmware for Samsung Galaxy S6, released for 21 countries, 27 CSC codes. Samsung built it on 2017-03-30.

    No. A newer build for SM-G920F is available: G920FXXU6EVI1. Install it instead of G920FXXU5EQCS unless you need this exact version. The previous build was G920FXXU5EQCN.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.41 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy S6 must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy S6 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 134 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6

    No changelog details available.

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 15 older builds

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    Model firmware by region