Samsung Galaxy S6 G920FXXU5EQDM
SM-G920F 11 countries Android 7.0 (Lollipop)

Samsung Galaxy S6 G920FXXU5EQDM Firmware

Samsung Galaxy S6 G920FXXU5EQDM is an Android 7.0 (Lollipop) firmware for 11 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G920FXXU5EQDL: Android updated from Android 7.0 (Nougat) to Android 7.0 (Lollipop). A newer build for SM-G920F is available: G920FXXU6EVI1.

9.4/10 (452)74,175 times
Android 7.0 (Lollipop)
OS Version
2017-04-24
Build Date
n/a
Security patch
11
Countries
17
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S6 use bootloader binary 6 (latest: G920FXXU6EVI1). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    17
    MODEM/CP Version: G920FXXU5EQDM
    ModelRegionCSC VersionSizeFile nameDownload
    SM-G920F
    COA Romania
    		G920F5EQD2 — —
    SM-G920F
    COS Greece
    		G920F5EQD2 — —
    SM-G920F
    CRO Croatia
    		G920FDHX5EQD2 — —
    SM-G920F
    DDE Germany
    		G920FDDX5EQD2 — —
    SM-G920F
    DHR Croatia
    		G920FDHX5EQD2 — —
    SM-G920F
    DNL Netherlands
    		G920FDNX5EQD2 — —
    SM-G920F
    DPL Poland
    		G920FDPX5EQD2 — —
    SM-G920F
    DTM Germany
    		G920FDDX5EQD2 — —
    SM-G920F
    MAX Austria
    		G920FDAX5EQD2 — —
    SM-G920F
    MBM Macedonia
    		G920F5EQD2 — —
    SM-G920F
    TMH Hungary
    		G920F5EQD2 — —
    SM-G920F
    TMS Slovakia
    		G920F5EQD2 — —
    SM-G920F
    TMZ Czechia
    		G920F5EQD2 — —
    SM-G920F
    TNL Netherlands
    		G920FDNX5EQD2 — —
    SM-G920F
    TPL Poland
    		G920FDPX5EQD2 — —
    SM-G920F
    TRG Austria
    		G920FDAX5EQD2 — —
    SM-G920F
    TTR Austria
    		G920FDAX5EQD2 — —

    No matching downloads

    Device specifications

    • Launched withAndroid 5.0
    • Display diagonal12.9 cm (5.1")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM3 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity2550 mAh
    • Weight138 g

    How to flash G920FXXU5EQDM

    • G920FXXU5EQDM has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G920FXXU5EQDM is Android 7.0 (Lollipop) firmware for Samsung Galaxy S6, released for 11 countries, 17 CSC codes. Samsung built it on 2017-04-24.

    No. A newer build for SM-G920F is available: G920FXXU6EVI1. Install it instead of G920FXXU5EQDM unless you need this exact version. The previous build was G920FXXU5EQDL.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy S6 running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 134 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6

    No changelog details available.

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Show 15 older builds

    • GPS
    The stability has been improved.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • GPS
    The stability has been improved.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    Model firmware by region