Samsung Galaxy S6 edge+ G928FXXU5CRI1
SM-G928F 21 countries Android 7.0 (Nougat)

Samsung Galaxy S6 edge+ G928FXXU5CRI1 Firmware

Samsung Galaxy S6 edge+ G928FXXU5CRI1 is an Android 7.0 (Nougat) firmware for 21 countries, 34 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G928FXXS5CRH2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G928F is available: G928FXXU5CVG3.

8.8/10 (470)169,145 times
Android 7.0 (Nougat)
OS Version
2018-09-17
First release
other regions until 2018-12-21
n/a
Security patch
21
Countries
34
CSC codes
5
Bootloader binary

Bootloader binary 5. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    35
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-G928F
    BGL Bulgaria
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    COA Romania
    		G928FCOA4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    COS Greece
    		G928F4CRF1G928FXXU5CRI1 2018-09-17 — — —
    SM-G928F
    COS Greece
    		G928FCOS4CRF1G928FXXU5CRH3 2018-09-17 2018-11-02 2.288 GiB
    SM-G928F_1_20181101171401_m7uphf229i_fac.zip
    SM-G928F
    CRO Croatia
    		G928FDHX4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    CYO Cyprus
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    DBT Germany
    		G928FDBT4CRF1G928FXXU5CRH1 — — — —
    SM-G928F
    DDE, DTM Germany
    DCO
    		G928FDDX4CRF1G928FXXU5CRH3 2018-10-26 2018-10-26 2.299 GiB
    SM-G928F_1_20181025152827_mm1c0lc0h1_fac.zip
    SM-G928F
    DHR Croatia
    		G928FDHX4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    DNL, TNL Netherlands
    		G928FDNX4CRF1G928FXXU5CRH3 2018-09-17 2018-10-26 2.243 GiB
    SM-G928F_1_20181026093614_h6s20yhgdq_fac.zip
    SM-G928F
    DPL, TPL Poland
    		G928FDPX4CRF1G928FXXU5CRH3 2018-10-01 2018-11-08 2.287 GiB
    SM-G928F_1_20181107163514_zj7uhlnk6q_fac.zip
    SM-G928F
    ETL Czechia
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    MAX Austria
    		G928FDAX4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    MBM Macedonia
    		G928FMBM4CRB1G928FXXU5CRH3 — — — —
    SM-G928F
    MET Ireland
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    ORX Slovakia
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    PHN Netherlands
    		G928FPHN4CRE1G928FXXU5CRH2 2018-12-21 2018-12-21 2.206 GiB
    SM-G928F_1_20181220162053_g06rq9of5c_fac.zip
    SM-G928F
    PHN Netherlands
    		G928F4CRE1G928FXXU5CRI1 2018-09-17 — — —
    SM-G928F
    ROM Romania
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    SEB Baltic Europe
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    SEE Serbia
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    SIO Slovenia
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    TMH Hungary
    		G928FTMH4CRF1G928FXXU5CRH3 2018-09-27 2018-10-26 2.321 GiB
    SM-G928F_1_20181026114253_2u5wg7daci_fac.zip
    SM-G928F
    TMH Hungary
    		G928F4CRF1G928FXXU5CRI1 2018-09-17 — — —
    SM-G928F
    TMS Slovakia
    		G928FTMS4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    TMT Montenegro
    		G928FTMT4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    TMZ Czechia
    		G928FTMZ4CRF1G928FXXU5CRH3 2018-11-02 2018-11-02 2.209 GiB
    SM-G928F_1_20181101170753_26wlfxc2ap_fac.zip
    SM-G928F
    TMZ Czechia
    		G928F4CRF1G928FXXU5CRI1 2018-09-17 — — —
    SM-G928F
    TMZ Czechia
    		G928FTMZ4CRF1G928FXXU5CRI1 2018-09-17 — — —
    SM-G928F
    TPH Portugal
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    TRG Austria
    		G928FDAX4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    TTR Austria
    		G928FDAX4CRF1G928FXXU5CRH3 — — — —
    SM-G928F
    XEF France
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    XEH Hungary
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —
    SM-G928F
    XEO Poland
    		G928FOXX4CRG1G928FXXU5CRH1 — — — —

    No matching downloads

    Device specifications

    • Launched withAndroid 5.1
    • Display diagonal14.5 cm (5.7")
    • Display resolution2560 x 1440 pixels
    • Display typeSAMOLED
    • Processor frequency2.1 GHz
    • Processor familySamsung Exynos
    • Processor model7 Octa 7420
    • RAM4 GB
    • Rear camera resolution16 MP
    • Rear camera typeSingle camera
    • SIM cardsSingle SIM
    • Battery capacity3000 mAh
    • Weight153 g

    How to flash G928FXXU5CRI1

    • G928FXXU5CRI1 has bootloader binary 5. Your device must run binary 5 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    G928FXXU5CRI1 is Android 7.0 (Nougat) firmware for Samsung Galaxy S6 edge+, released for 21 countries, 34 CSC codes. Samsung built it on 2018-09-17.

    No. A newer build for SM-G928F is available: G928FXXU5CVG3. Install it instead of G928FXXU5CRI1 unless you need this exact version. The previous build was G928FXXS5CRH2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S6 edge+ must be on bootloader binary 5 or lower.

    This build uses bootloader binary 5. It can be flashed on a Samsung Galaxy S6 edge+ running binary 5 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 6 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy S6 edge+

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    No changelog details available.
    Show 15 older builds
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    No changelog details available.
    Model firmware by region