SM-G930F 11 countries Android 8.0.0 (Oreo)

Samsung Galaxy S7 G930FXXS8ETK3 Firmware

Name: Samsung Galaxy S7 (SM-G930F)
Brand: Samsung
Availability: InStock

Samsung Galaxy S7 G930FXXS8ETK3 is an Android 8.0.0 (Oreo) firmware for 11 countries, 17 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build G930FXXS8ETK1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-G930F is available: G930FXXU8EZCD.

9.4/10 (467)75,593 times

Android 8.0.0 (Oreo)

OS Version

2020-11-29

First release

other regions until 2021-01-05

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 8. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-G930F	CDR Dominican Republic	G930FCDR8ETCA	G930FXXS8ETCZ	2020-12-02	2020-12-02	2.736 GiB	SM-G930F_1_20201122002604_0lwnx51hvg_fac.zip
SM-G930F	CHT Chile COB Colombia MMO, TMM Mexico NBS Nicaragua +3 more countries TGU Guatemala UFN Argentina UFU Uruguay	G930FUWT8ETCA	G930FXXS8ETCZ	2021-01-05	2020-11-30	2.639 GiB	SM-G930F_1_20201122004534_itnk7wz84f_fac.zip
SM-G930F	CRC Chile	G930FCRC8ETCA	G930FXXS8ETCZ	2020-12-02	2020-12-02	2.693 GiB	SM-G930F_1_20201122002934_hleyziecz9_fac.zip
SM-G930F	DOR Dominican Republic	G930FUWE8ETCC	G930FXXS8ETCZ	2020-12-22	2020-12-22	2.435 GiB	SM-G930F_1_20201212035603_k4w39ah0sc_fac.zip
SM-G930F	ECO Ecuador	G930FECO8ETCA	G930FXXS8ETCZ	2020-12-02	2020-12-02	2.723 GiB	SM-G930F_1_20201122003204_axkekar8ro_fac.zip
SM-G930F	PET Peru	G930FPET8ETCA	G930FXXS8ETCZ	2020-12-02	2020-12-02	2.695 GiB	SM-G930F_1_20201122003434_euogstyj8n_fac.zip
SM-G930F	PGU Guatemala	G930FPGU8ETCA	G930FXXS8ETCZ	2020-12-02	2020-12-02	2.693 GiB	SM-G930F_1_20201122003734_tvgk4uvj5e_fac.zip
SM-G930F	SAM Peru	G930FUWT8ETCC	G930FXXS8ETCZ	2020-12-03	2020-12-03	2.639 GiB	SM-G930F_1_20201122004834_d9w3lioc5k_fac.zip
SM-G930F	ZTM Brazil	G930FZTM8ETCA	G930FXXS8ETCZ	2020-12-11	2020-12-11	2.638 GiB	SM-G930F_1_20201205042634_p2rv7bflg0_fac.zip
SM-G930F	ZVV Brazil	G930FZVV8ETCA	G930FXXS8ETCN	2020-11-29	2020-11-30	2.714 GiB	SM-G930F_1_20201122002104_l1qmtfhbsy_fac.zip

Device specifications

Launched withAndroid 6.0
Display diagonal12.9 cm (5.1")
Display resolution2560 x 1440 pixels
Display typeSAMOLED
Processor frequency2.3 GHz
Processor familySamsung Exynos
RAM4 GB
RAM typeLPDDR4
Rear camera resolution12 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity3000 mAh
Weight152 g

How to flash G930FXXS8ETK3

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

G930FXXS8ETK3 has bootloader binary 8. Your device must run binary 8 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

G930FXXS8ETK3 is Android 8.0.0 (Oreo) firmware for Samsung Galaxy S7, released for 11 countries, 17 CSC codes. Samsung built it on 2020-11-29.

No. A newer build for SM-G930F is available: G930FXXU8EZCD. Install it instead of G930FXXS8ETK3 unless you need this exact version. The previous build was G930FXXS8ETK1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S7 must be on bootloader binary 8 or lower.

This build uses bootloader binary 8. It can be flashed on a Samsung Galaxy S7 running binary 8 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 46 other builds of this model use the same binary, so you can switch between them in both directions.