GT-I9100 5 countries Android 4.1.2 (Jelly Bean)

Samsung Galaxy S Ⅱ I9100XWLSZ Firmware

Name: Samsung Galaxy S Ⅱ (GT-I9100)
Brand: Samsung
Availability: InStock

Samsung Galaxy S Ⅱ I9100XWLSZ is an Android 4.1.2 (Jelly Bean) firmware for 5 countries, 9 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build I9100XWLSY: Android updated from Jelly(Android Bean) to Android 4.1.2 (Jelly Bean). A newer build for GT-I9100 is available: I9100ZSMSA.

9.2/10 (451)47,044 times

Android 4.1.2 (Jelly Bean)

OS Version

2013-09-10

First release

other regions until 2013-10-28

n/a

Security patch

Countries

CSC codes

X (33)

Bootloader binary

Bootloader binary X (33). Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy S Ⅱ use bootloader binary Z (35) (latest: I9100ZSMSA). If your device already runs binary Z (35), this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
GT-I9100	AUT Switzerland	I9100OXXLSD	I9100XXMS3	2013-10-21	2013-10-21	589.068 MiB	GT-I9100_AUT_1_20141012202740_3dcdknn194_fac.zip
GT-I9100	CYV Cyprus	I9100OXXLSE	I9100XXMS3	—	—	—	—
GT-I9100	O2I Ireland	I9100O2ILS8	I9100XXMS3	2013-10-28	2013-10-28	860.706 MiB	GT-I9100_O2I_1_20140729183510_kdn94d29vl_fac.zip
GT-I9100	O2I Ireland	I9100XXMS3	I9100O2ILS8	2013-09-10	—	—	—
GT-I9100	ORG Switzerland	I9100ORGLS1	I9100XXMS3	2013-10-24	2013-10-24	570.227 MiB	GT-I9100_ORG_1_20141012203020_6yuqocw7nl_fac.zip
GT-I9100	ORG Switzerland	I9100XXMS3	I9100ORGLS1	2013-09-10	—	—	—
GT-I9100	XFA South Africa	I9100OJCLS5	I9100XXMS3	—	—	—	—
GT-I9100	XFC	I9100OJCLS5	I9100XXMS3	—	—	—	—
GT-I9100	XFE South Africa	I9100OJCLS5	I9100XXMS3	—	—	—	—
GT-I9100	XFM South Africa	I9100OJCLS5	I9100XXMS3	2013-09-30	2013-09-30	—	—
GT-I9100	XFV South Africa	I9100OJCLS5	I9100XXMS3	—	—	—	—

Device specifications

Launched withAndroid 2.3
Display diagonal10.8 cm (4.27")
Display resolution480 x 800 pixels
Display typeAMOLED
Processor frequency1.2 GHz
Rear camera resolution8 MP
Rear camera typeSingle camera
SIM cardsSingle SIM
Battery capacity1650 mAh
Weight116 g

How to flash I9100XWLSZ

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

I9100XWLSZ has bootloader binary X (33). Your device must run binary X (33) or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

I9100XWLSZ is Android 4.1.2 (Jelly Bean) firmware for Samsung Galaxy S Ⅱ, released for 5 countries, 9 CSC codes. Samsung built it on 2013-09-10.

No. A newer build for GT-I9100 is available: I9100ZSMSA. Install it instead of I9100XWLSZ unless you need this exact version. The previous build was I9100XWLSY.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy S Ⅱ must be on bootloader binary X (33) or lower.

This build uses bootloader binary X (33). It can be flashed on a Samsung Galaxy S Ⅱ running binary X (33) or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 21 other builds of this model use the same binary, so you can switch between them in both directions.