Samsung Galaxy J1 J120MUBU2ARD1
SM-J120M 8 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J1 J120MUBU2ARD1 Firmware

Samsung Galaxy J1 J120MUBU2ARD1 is an Android 5.1.1 (Lollipop) firmware for 8 countries, 11 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J120MUBU2ARC1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J120M is available: J120MUBU2ARE1.

9.4/10 (455)52,392 times
Android 5.1.1 (Lollipop)
OS Version
2018-04-05
Build Date
n/a
Security patch
8
Countries
11
CSC codes
2
Bootloader binary

Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    8
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J120M
    CGU Guatemala
    		J120MUWM2ARD1J120MUBU2ARA2 2018-04-05 2018-04-26 1.04 GiB
    SM-J120M_1_20180425175214_v39yn24ptx_fac.zip
    SM-J120M
    CHO Chile
    COO Colombia
    TPA Panama
    TTT Trinidad & Tobago
    +1 more country
    UYO Uruguay
    		J120MUUB2AQJ1J120MUBU2ARA2 2018-04-05 2018-04-26 1017.519 MiB
    SM-J120M_1_20180425143253_jcyv0skh37_fac.zip
    SM-J120M
    CPA Panama
    		J120MUWA2ARA2J120MUBU2ARA2 — — — —
    SM-J120M
    CRC Chile
    		J120MUWA2ARA2J120MUBU2ARA2 — — — —
    SM-J120M
    PCT Puerto Rico
    		J120MUWA2ARA2J120MUBU2ARA2 — — — —
    SM-J120M
    PGU Guatemala
    		J120MUWA2ARA1J120MUBU2ARA2 2018-04-05 2018-04-26 1.109 GiB
    SM-J120M_1_20180426135927_y8zv3tjwey_fac.zip
    SM-J120M
    ZTA Brazil
    		J120M2ARD1J120MUBU2ARD1 2018-04-05 — — —
    SM-J120M
    ZTA Brazil
    		J120MZTA2ARD1J120MUBU2ARA2 2018-04-05 2018-06-19 1.108 GiB
    SM-J120M_1_20180619170540_lg0ns327mx_fac.zip

    No matching downloads

    How to flash J120MUBU2ARD1

    • J120MUBU2ARD1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J120MUBU2ARD1 by region

    First release
    April 26, 2018
    Last region
    June 20, 2018
    Duration
    56 days
    Regions
    8
    1. Day 1 · · 3 regions
      GuatemalaCGUPGUPanamaTPA
    2. Day 5 · · 1 region
      UruguayUYO
    3. Day 14 · · 1 region
      Trinidad & TobagoTTT
    4. Day 20 · · 1 region
      ColombiaCOO
    5. Day 55 · · 1 region
      BrazilZTA
    6. Day 56 · · 1 region
      ChileCHO

    Device specifications

    • Display diagonal11.4 cm (4.5")
    • Display resolution800 x 480 pixels
    • Display typeSAMOLED
    • RAM1 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity2050 mAh
    • Weight131 g

    Specifications of SM-J120, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J120MUBU2ARD1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J1, released for 8 countries, 11 CSC codes. Samsung built it on 2018-04-05.

    No. A newer build for SM-J120M is available: J120MUBU2ARE1. Install it instead of J120MUBU2ARD1 unless you need this exact version. The previous build was J120MUBU2ARC1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J1 must be on bootloader binary 2 or lower.

    This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy J1 running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 20 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J1

    No changelog details available.
    Model firmware by region