Samsung Galaxy J3(2016) J320FDDU0AQL2
SM-J320F 4 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J3(2016) J320FDDU0AQL2 Firmware

Samsung Galaxy J3(2016) J320FDDU0AQL2 is an Android 5.1.1 (Lollipop) firmware for 4 countries, 4 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J320FDRU0AQL2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J320F is available: J320FXXU0ARL2.

9.2/10 (37)17,605 times
Android 5.1.1 (Lollipop)
OS Version
2017-12-20
First release
other regions until 2018-01-05
n/a
Security patch
4
Countries
4
CSC codes
0
Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J320F
    BNG Bangladesh
    		J320FODD0AQL2J320FDDU0AQH1 2017-12-20 2018-01-16 1012.89 MiB
    SM-J320F_1_20181009083253_y0b6dqbycj_fac.zip
    SM-J320F
    INS India
    		J320FODD0AQL2J320FDDU0AQH1 2018-01-05 2018-01-05 1013.706 MiB
    SM-J320F_1_20180105101052_8icgmd2kyj_fac.zip
    SM-J320F
    INS India
    		J320FODD0AQL2J320FDDU0AQL2 2017-12-20 — — —
    SM-J320F
    NPL Nepal
    SLK Sri Lanka
    		J320FODD0AQL2J320FDDU0AQH1 2017-12-20 2018-01-16 1012.89 MiB
    SM-J320F_1_20180531150540_9x0fu5absc_fac.zip

    No matching downloads

    How to flash J320FDDU0AQL2

    • J320FDDU0AQL2 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J320FDDU0AQL2 by region

    First release
    January 5, 2018
    Last region
    January 16, 2018
    Duration
    12 days
    Regions
    4
    1. Day 1 · · 1 region
      IndiaINS
    2. Day 12 · · 3 regions
      BangladeshBNGNepalNPLSri LankaSLK

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeSAMOLED
    • Processor frequency1.5 GHz
    • RAM1.5 GB
    • RAM typeLPDDR3
    • Rear camera resolution8 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity2600 mAh
    • Weight138 g

    Frequently Asked Questions

    J320FDDU0AQL2 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J3(2016), released for 4 countries, 4 CSC codes. Samsung built it on 2017-12-20.

    No. A newer build for SM-J320F is available: J320FXXU0ARL2. Install it instead of J320FDDU0AQL2 unless you need this exact version. The previous build was J320FDRU0AQL2.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J3(2016) must be on bootloader binary 0 or lower.

    This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J3(2016) running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 58 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J3(2016)

    No changelog details available.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    No changelog details available.

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    No changelog details available.
    Model firmware by region