SM-J320FN 12 countries Android 5.1.1 (Lollipop)

Samsung Galaxy J3(2016) J320FNXXU0ASH1 Firmware

Name: Samsung Galaxy J3(2016) (SM-J320FN)
Brand: Samsung
Availability: InStock

Samsung Galaxy J3(2016) J320FNXXU0ASH1 is an Android 5.1.1 (Lollipop) firmware for 12 countries, 12 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J320FNXXU0ARH1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. This is the newest build for SM-J320FN.

9.1/10 (451)55,990 times

Android 5.1.1 (Lollipop)

OS Version

2019-08-26

First release

other regions until 2019-10-10

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 0. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name
SM-J320FN	ATL Spain	J320FNVFR0ASH1	J320FNXXU0ASH2	—	—	—	—
SM-J320FN	CYV Cyprus	J320FNVFG0ARB1	J320FNXXU0ASF4	—	—	—	—
SM-J320FN	OMN Italy	J320FNVFR0ASH1	J320FNXXU0ASH2	—	—	—	—
SM-J320FN	TCL Portugal	J320FNVFR0ASH1	J320FNXXU0ASH2	—	—	—	—
SM-J320FN	TOP Montenegro	J320FNVFG0ARB1	J320FNXXU0ASF4	—	—	—	—
SM-J320FN	VDC Czechia	J320FNVFG0ARB1	J320FNXXU0ASF4	—	—	—	—
SM-J320FN	VDH Hungary	J320FNVFR0ASH1	J320FNXXU0ASH2	—	—	—	—
SM-J320FN	VDI Ireland	J320FNVFR0ASH1	J320FNXXU0ASH2	—	—	—	—
SM-J320FN	VGR Greece	J320FNVFR0ASH1	J320FNXXU0ASH2	—	—	—	—
SM-J320FN	VIP Croatia	J320FNVFG0ARB1	J320FNXXU0ASF4	—	—	—	—
SM-J320FN	VOD United Kingdom	J320FNVFR0ASH1	J320FNXXU0ASH2	2019-10-10	2019-10-10	1.075 GiB	SM-J320FN_1_20191010113327_nicy7r3dn2_fac.zip
SM-J320FN	VOD United Kingdom	J320FNVFR0ASH1	J320FNXXU0ASH1	2019-08-26	2019-10-09	—	—
SM-J320FN	XFV South Africa	J320FNVFR0ASH1	J320FNXXU0ASH2	—	—	—	—

Device specifications

Display diagonal12.7 cm (5")
Display resolution1280 x 720 pixels
Display typeSAMOLED
RAM1.5 GB
RAM typeLPDDR3
Rear camera resolution8 MP
Rear camera typeSingle camera
Battery capacity2600 mAh
Weight138 g

Specifications of SM-J320F, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

What's new in J320FNXXU0ASH1

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

How to flash J320FNXXU0ASH1

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J320FNXXU0ASH1 has bootloader binary 0. Your device must run binary 0 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J320FNXXU0ASH1 is Android 5.1.1 (Lollipop) firmware for Samsung Galaxy J3(2016), released for 12 countries, 12 CSC codes. Samsung built it on 2019-08-26.

Yes. J320FNXXU0ASH1 is the newest build for SM-J320FN on SamFirm. The previous build was J320FNXXU0ARH1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.075 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J3(2016) must be on bootloader binary 0 or lower.

This build uses bootloader binary 0. It can be flashed on a Samsung Galaxy J3(2016) running binary 0 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 46 other builds of this model use the same binary, so you can switch between them in both directions.

Other builds and changelog for Samsung Galaxy J3(2016)

J320FNXXU0ASH1 this buildOct 9, 2019

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

J320FNXXU0ARH1 Jun 26, 2019

· Battery usage optimization

J320FNXXU0ARE1 Feb 28, 2023

· Device stability improvements, bug fixes.
· New and / or enhanced features.
· Further improvements to performance.

J320FNXXU0ARB1 Feb 26, 2018