Samsung Galaxy J3 Prime J327TUVS4ASH2
SM-J327T 1 country Android 7.0 (Nougat)

Samsung Galaxy J3 Prime J327TUVS4ASH2 Firmware

Samsung Galaxy J3 Prime J327TUVS4ASH2 is an Android 7.0 (Nougat) firmware for United States (TMB). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J327TUVS3ASB1: bootloader binary raised from 3 to 4, so after installing it there is no way back to older builds. This is the newest build for SM-J327T.

8.8/10 (454)8,755 times
Android 7.0 (Nougat)
OS Version
2019-08-06
First release
other regions until 2019-08-29
2019-08-01
Security patch
1
Countries
1
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: J327TUVS4ASH2
    ModelRegionCSC VersionBuild DateRelease dateSizeFile nameDownload
    SM-J327T
    TMB United States
    		J327TTMB4ASH2 2019-08-29 2019-08-29 1.547 GiB
    SM-J327T_1_20190809152327_xrv2h9b5nl_fac.zip
    SM-J327T
    TMB United States
    		J327T4ASH2 2019-08-06 2019-08-29 — —

    No matching downloads

    How to flash J327TUVS4ASH2

    • J327TUVS4ASH2 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    What's new in J327TUVS4ASH2

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeTFT
    • RAM1.5 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight148 g

    Specifications of SM-J327, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J327TUVS4ASH2 is Android 7.0 (Nougat) firmware for Samsung Galaxy J3 Prime, released for United States (TMB). It includes the 2019-08-01 security patch. Samsung built it on 2019-08-06.

    Yes. J327TUVS4ASH2 is the newest build for SM-J327T on SamFirm. The previous build was J327TUVS3ASB1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.547 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J3 Prime must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy J3 Prime running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 4.

    Other builds and changelog for Samsung Galaxy J3 Prime

    · Device stability improvements, bug fixes.
    · New and / or enhanced features.
    · Further improvements to performance.

    No changelog details available.
    Model firmware by region