Samsung Galaxy J3 Prime J327WVLS4BSK1
SM-J327W 1 country Android 8.1.0 (Oreo)

Samsung Galaxy J3 Prime J327WVLS4BSK1 Firmware

Samsung Galaxy J3 Prime J327WVLS4BSK1 is an Android 8.1.0 (Oreo) firmware for Canada (BMC, BWA, CHR, FMC, KDO, MTB, PCM, RWC, SOL, SPC, TLS, VMC, VTR, XAC). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J327WVLU3BSF1: bootloader binary raised from 3 to 4, so after installing it there is no way back to older builds. A newer build for SM-J327W is available: J327WVLS6BTK2.

9.4/10 (472)61,058 times
Android 8.1.0 (Oreo)
OS Version
2019-11-14
First release
other regions until 2019-11-22
n/a
Security patch
1
Countries
14
CSC codes
4
Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

Newer builds of Samsung Galaxy J3 Prime use bootloader binary 6 (latest: J327WVLS6BTK2). If your device already runs binary 6, this build cannot be flashed.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    MODEM/CP Version: J327WVLS4BSK1
    ModelRegionCSC VersionRelease dateSizeFile nameDownload
    SM-J327W
    BMC, BWA, CHR, FMC, KDO, MTB, PCM, RWC, SOL, SPC, TLS, VMC, VTR, XAC Canada
    		J327WOYA4BSK1 2019-12-02 2.031 GiB
    SM-J327W_1_20201127185934_hnp935jup9_fac.zip
    MD5:ef239d4b574bcf410ae9a8cb864473a3
    SHA1:3dbb679879ef4778b0d2e28b681270366efc6afd

    No matching downloads

    How to flash J327WVLS4BSK1

    • J327WVLS4BSK1 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Rollout of J327WVLS4BSK1 by region

    First release
    December 2, 2019
    Last region
    December 9, 2019
    Duration
    8 days
    Regions
    14
    1. Day 1 · · 9 regions
      CanadaBMCBWAKDOMTBPCMSOLSPCTLSVMC
    2. Day 8 · · 5 regions
      CanadaCHRFMCRWCVTRXAC

    Device specifications

    • Display diagonal12.7 cm (5")
    • Display resolution1280 x 720 pixels
    • Display typeTFT
    • RAM1.5 GB
    • Rear camera resolution5 MP
    • Rear camera typeSingle camera
    • Battery capacity2600 mAh
    • Weight148 g

    Specifications of SM-J327, a regional variant of the same device. Chipset and SIM lines are left out: they can differ by region.

    Frequently Asked Questions

    J327WVLS4BSK1 is Android 8.1.0 (Oreo) firmware for Samsung Galaxy J3 Prime, released for Canada (BMC, BWA, CHR, FMC, KDO, MTB, PCM, RWC, SOL, SPC, TLS, VMC, VTR, XAC). Samsung built it on 2019-11-14.

    No. A newer build for SM-J327W is available: J327WVLS6BTK2. Install it instead of J327WVLS4BSK1 unless you need this exact version. The previous build was J327WVLU3BSF1.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 2.031 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J3 Prime must be on bootloader binary 4 or lower.

    This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy J3 Prime running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". No other build of this model uses binary 4.

    Other builds and changelog for Samsung Galaxy J3 Prime

    No changelog details available.

    · The security of your device has been improved.

    No changelog details available.
    Model firmware by region