SM-J330FN 10 countries Android 9 (Pie)

Samsung Galaxy J3(2017) J330FNXXS4CUD5 Firmware

Name: Samsung Galaxy J3(2017) (SM-J330FN)
Brand: Samsung
Availability: InStock

Samsung Galaxy J3(2017) J330FNXXS4CUD5 is an Android 9 (Pie) firmware for 10 countries, 12 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J330FNXXS4CUD4, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J330FN is available: J330FNXXU4CZC1.

9.4/10 (453)52,897 times

Android 9 (Pie)

OS Version

2021-05-21

First release

other regions until 2021-06-17

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 4. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Not sure which one to download?

Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.

MODEM/CP Version: J330FNXXU4CTJ1

Model	Region	CSC Version	Build Date	Release date	Size	File name
SM-J330FN	BGL Bulgaria ERO Bosnia & Herzegovina EUR Greece SEE Serbia	J330FNOXX4CUD5	2021-06-09	2021-05-21	2.188 GiB	SM-J330FN_1_20210424162806_89bp72kfls_fac.zip
SM-J330FN	BHT Bosnia & Herzegovina	J330FNBHT4CUD5	2021-06-09	2021-06-10	2.173 GiB	SM-J330FN_1_20210424161836_46t02bqr5i_fac.zip
SM-J330FN	MOT Slovenia	J330FNMOT4CUD5	2021-06-09	2021-06-10	2.327 GiB	SM-J330FN_1_20210424190348_zbrpyv8tzy_fac.zip
SM-J330FN	MSR Serbia	J330FNMSR4CUD5	2021-06-17	2021-06-18	2.266 GiB	SM-J330FN_1_20210424163236_6oezzhf4nu_fac.zip
SM-J330FN	O2C Czechia	J330FNO2C4CUD5	2021-06-09	2021-06-10	2.261 GiB	SM-J330FN_1_20210424164506_hekym46n4o_fac.zip
SM-J330FN	PAN Hungary	J330FNPAN4CUD5	2021-06-17	2021-06-18	2.191 GiB	SM-J330FN_1_20210424162906_zq4lzafght_fac.zip
SM-J330FN	PHN Netherlands	J330FNPHN4CUD5	2021-06-17	2021-06-18	2.157 GiB	SM-J330FN_1_20210424163306_igae9xxvlx_fac.zip
SM-J330FN	TOP Montenegro	J330FNTOP4CUD5	2021-06-17	2021-06-18	2.178 GiB	SM-J330FN_1_20210424162006_6b4t7ghvj0_fac.zip
SM-J330FN	XEF France	J330FNXEF4CUD5	2021-06-17	2021-06-18	2.14 GiB	SM-J330FN_1_20210424162836_k5chzhp60v_fac.zip

Device specifications

Display diagonal12.7 cm (5")
Display resolution1280 x 720 pixels
Display typeSAMOLED
Processor frequency1.4 GHz
RAM2 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
SIM cardsDual SIM
Battery capacity2400 mAh
Weight142 g

How to flash J330FNXXS4CUD5

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J330FNXXS4CUD5 has bootloader binary 4. Your device must run binary 4 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J330FNXXS4CUD5 is Android 9 (Pie) firmware for Samsung Galaxy J3(2017), released for 10 countries, 12 CSC codes. Samsung built it on 2021-05-21.

No. A newer build for SM-J330FN is available: J330FNXXU4CZC1. Install it instead of J330FNXXS4CUD5 unless you need this exact version. The previous build was J330FNXXS4CUD4.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J3(2017) must be on bootloader binary 4 or lower.

This build uses bootloader binary 4. It can be flashed on a Samsung Galaxy J3(2017) running binary 4 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 7 other builds of this model use the same binary, so you can switch between them in both directions.