Samsung Galaxy J4+ J415FXXU6BTB3
SM-J415F 8 countries Android 9 (Pie)

Samsung Galaxy J4+ J415FXXU6BTB3 Firmware

Samsung Galaxy J4+ J415FXXU6BTB3 is an Android 9 (Pie) firmware for 8 countries, 10 CSC codes. It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J415FXXU5BSL3: bootloader binary raised from 5 to 6, so after installing it there is no way back to older builds; security patch 2020-02-01 instead of 2019-12-01. A newer build for SM-J415F is available: J415FXXU6BWH5.

9.1/10 (27)42,883 times
Android 9 (Pie)
OS Version
2020-02-12
First release
other regions until 2020-02-14
2020-02-01
Security patch
8
Countries
10
CSC codes
6
Bootloader binary

Bootloader binary 6. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
    Your CSC is in Settings → About phone (About tablet) → Software information, or dial *#1234#. The CSC sets your region's features and network bands. Download the firmware for your country.
    8
    ModelRegionCSC VersionMODEM/CP VersionBuild DateRelease dateSizeFile nameDownload
    SM-J415F
    AIS
    		J415FOLM6BTB1J415FXXU6BTB3 2020-02-12 2020-02-21 — —
    SM-J415F
    CAM Cambodia
    MM1, STH Singapore
    THL Thailand
    		J415FOLM6BTB1J415FXXU6BTB1 2020-02-14 2020-02-21 2.488 GiB
    SM-J415F_1_20221010173540_dvwdpfa8jt_fac.zip
    MD5:e63735b2dbff3ef489bae028ab85fb98
    SHA1:a73129440cb30a76d0e9abc920b88119630840e8
    SM-J415F
    MYM Myanmar (Burma)
    		J415FOLM6BTB1J415FXXU6BTB3 2020-02-12 2020-02-22 — —
    SM-J415F
    XID Indonesia
    		J415FOLE6BTB1J415FXXU6BTB1 2020-02-14 2020-04-02 2.361 GiB
    SM-J415F_1_20200214201041_43uwewpogo_fac.zip
    SM-J415F
    XID Indonesia
    		J415FOLE6BTB1J415FXXU6BTB3 2020-02-12 2020-04-01 — —
    SM-J415F
    XME Malaysia
    		J415FOLM6BTB1J415FXXU6BTB3 2020-02-12 2020-02-21 — —
    SM-J415F
    XSP Singapore
    		J415FOLM6BTB1J415FXXU6BTB3 2020-02-12 2020-03-08 — —
    SM-J415F
    XXV Vietnam
    		J415FOLM6BTB1J415FXXU6BTB3 2020-02-12 2020-02-21 — —

    No matching downloads

    Device specifications

    • Launched withAndroid 8.1
    • Display diagonal15.2 cm (6")
    • Display resolution720 x 1480 pixels
    • Display typeTFT
    • Processor frequency1.4 GHz
    • Processor familySamsung Exynos
    • RAM2 GB
    • Rear camera resolution13 MP
    • Rear camera typeSingle camera
    • SIM cardsDual SIM
    • Battery capacity3300 mAh
    • Weight178 g

    What's new in J415FXXU6BTB3

    • The stability of Night mode has been improved.
    • The performance of Camera has been improved
    • The security of your device has been improved.

    How to flash J415FXXU6BTB3

    • J415FXXU6BTB3 has bootloader binary 6. Your device must run binary 6 or lower: it is the 5th character from the end of your current build number.
    • CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
    • HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
    • The Download Mode key combo depends on the model: see all combos.
    Full flashing guide
    Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

    Frequently Asked Questions

    J415FXXU6BTB3 is Android 9 (Pie) firmware for Samsung Galaxy J4+, released for 8 countries, 10 CSC codes. It includes the 2020-02-01 security patch. Samsung built it on 2020-02-12.

    No. A newer build for SM-J415F is available: J415FXXU6BWH5. Install it instead of J415FXXU6BTB3 unless you need this exact version. The previous build was J415FXXU5BSL3.

    Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The Samsung Galaxy J4+ must be on bootloader binary 6 or lower.

    This build uses bootloader binary 6. It can be flashed on a Samsung Galaxy J4+ running binary 6 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 22 other builds of this model use the same binary, so you can switch between them in both directions.

    Other builds and changelog for Samsung Galaxy J4+

    • Overall stability of your device has been improved.
    • The security of your device has been improved.

    • Stability and reliability
    Device behavior has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    Show 15 older builds

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The stability of Messages has been improved.
    • The stability of Calendar has been improved.
    • The security of your device has been improved.

    • The security of your device has been improved.

    • The stability of Messages has been improved.
    • The stability of Calendar has been improved.
    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    • The security of your device has been improved.

    Model firmware by region