Samsung Galaxy J5(2016) J510FNXXU2BRI1 Firmware
Samsung Galaxy J5(2016) J510FNXXU2BRI1 is an Android 7.1.1 (Nougat) firmware for India (INS). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J510FNXXU2BRH2, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J510FN is available: J510FNXXS3BTJ9.
8.7/10 (27)4,342 times
Android 7.1.1 (Nougat)
OS Version
2018-09-29
First release
other regions until 2018-10-31
n/a
Security patch
1
Countries
1
CSC codes
2
Bootloader binary
Bootloader binary 2. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.
Newer builds of Samsung Galaxy J5(2016) use bootloader binary 3 (latest: J510FNXXS3BTJ9). If your device already runs binary 3, this build cannot be flashed.
All regional downloads
Pick your region (CSC) to download the matching firmware package.
Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.
Device specifications
- Launched withAndroid 6.0
- Display diagonal13.2 cm (5.2")
- Display resolution1280 x 720 pixels
- Display typeSAMOLED
- Processor frequency1.2 GHz
- RAM2 GB
- Rear camera resolution13 MP
- Rear camera typeSingle camera
- SIM cardsSingle SIM
- Battery capacity3100 mAh
- Weight158 g
How to flash J510FNXXU2BRI1
- Install Samsung USB Drivers:Download Official Drivers
- Download Odin Flash Tool:
- J510FNXXU2BRI1 has bootloader binary 2. Your device must run binary 2 or lower: it is the 5th character from the end of your current build number.
- CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
- HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
- The Download Mode key combo depends on the model: see all combos.
Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.
Frequently Asked Questions
J510FNXXU2BRI1 is Android 7.1.1 (Nougat) firmware for Samsung Galaxy J5(2016), released for India (INS). Samsung built it on 2018-09-29.
No. A newer build for SM-J510FN is available: J510FNXXS3BTJ9. Install it instead of J510FNXXU2BRI1 unless you need this exact version. The previous build was J510FNXXU2BRH2.
Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.827 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J5(2016) must be on bootloader binary 2 or lower.
This build uses bootloader binary 2. It can be flashed on a Samsung Galaxy J5(2016) running binary 2 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 41 other builds of this model use the same binary, so you can switch between them in both directions.
Other builds and changelog for Samsung Galaxy J5(2016)
Show 15 older builds
· The security of your device has been improved.
※ If your device is encrypted, it must be decrypted before upgrading.
No changelog details available.