SM-J510MN 1 country Android 7.1.1 (Nougat)

Samsung Galaxy J5(2016) J510MNVJS3BSF2 Firmware

Name: Samsung Galaxy J5(2016) (SM-J510MN)
Brand: Samsung
Availability: InStock

Samsung Galaxy J5(2016) J510MNVJS3BSF2 is an Android 7.1.1 (Nougat) firmware for Mexico (TMM). It is the same firmware configured per region and carrier (CSC). Find your country below, verify the file and download for free. Compared with the previous build J510MNUBS3BSF1, Android and the bootloader binary are unchanged, so you can switch between the two in both directions. A newer build for SM-J510MN is available: J510MNUBS3BTJF.

8.7/10 (455)8,598 times

Android 7.1.1 (Nougat)

OS Version

2019-06-27

First release

other regions until 2019-07-22

n/a

Security patch

Countries

CSC codes

Bootloader binary

Bootloader binary 3. Flashing firmware with a lower binary is usually blocked by Samsung anti-rollback.

All regional downloads

Pick your region (CSC) to download the matching firmware package.

Will it work on my device?

Paste your current build number from Settings > About phone (About tablet) > Software information, or the output of *#1234#.

Model	Region	CSC Version	MODEM/CP Version	Build Date	Release date	Size	File name	Download
SM-J510MN	TMM Mexico	J510MNTMM3BSF1	J510MNUBS3BSF1	2019-07-22	2019-07-22	1.844 GiB	SM-J510MN_1_20190722110840_jt6189e4wu_fac.zip
SM-J510MN	TMM Mexico	J510MN3BSF1	J510MNVJS3BSF2	2019-06-27	—	—	—

Device specifications

Launched withAndroid 6.0.1
Display diagonal13.2 cm (5.2")
Display resolution720 x 1280 pixels
Display typeSAMOLED
Processor frequency1.2 GHz
Processor familyQualcomm Snapdragon
Processor model410
RAM2 GB
Rear camera resolution13 MP
Rear camera typeSingle camera
SIM cardsDual SIM
Battery capacity3100 mAh
Weight158 g

How to flash J510MNVJS3BSF2

Install Samsung USB Drivers:Download Official Drivers
Download Odin Flash Tool:

J510MNVJS3BSF2 has bootloader binary 3. Your device must run binary 3 or lower: it is the 5th character from the end of your current build number.
CSC: Use CSC for a clean install, to change the region (CSC code), to downgrade or to repair a device that does not boot.
HOME_CSC: Use HOME_CSC to update the same model and region while keeping your data. Back up anyway: a failed update can still require a reset.
The Download Mode key combo depends on the model: see all combos.

Full flashing guide

Beware: Manually flashing firmwares may brick your device. Use it at your own risk and follow our tutorial steps.

Frequently Asked Questions

J510MNVJS3BSF2 is Android 7.1.1 (Nougat) firmware for Samsung Galaxy J5(2016), released for Mexico (TMM). Samsung built it on 2019-06-27.

No. A newer build for SM-J510MN is available: J510MNUBS3BTJF. Install it instead of J510MNVJS3BSF2 unless you need this exact version. The previous build was J510MNUBS3BSF1.

Download the package for your region (CSC) and unzip it. In Odin, load each file into the slot with the same name: BL, AP, CP (if the package has one) and CSC, or HOME_CSC to keep your data. Odin checks the built-in checksum of every .tar.md5 file before flashing. The download is 1.844 GiB; keep about twice that free on the computer to unzip it. The Samsung Galaxy J5(2016) must be on bootloader binary 3 or lower.

This build uses bootloader binary 3. It can be flashed on a Samsung Galaxy J5(2016) running binary 3 or lower; if the device already has a higher binary, Odin stops with "SW REV CHECK FAIL". 34 other builds of this model use the same binary, so you can switch between them in both directions.